The Adam Audio T7V subwoofer set combines the outstandingsound reproduction of the Adam Audio T7V with the powerful Fame Audio Orbital Sub 10. The T7V delivers clear highs and excellent stereo imaging thanks to its U-ART 1.9-inch ribbon tweeter. The Sub 10 complements this with deep, precise bass thanks to its 10-inch woofer and a 200-watt Class-D power amplifier.
The bundle also includes height-adjustable Fame Audio DB 038 monitor stands and high-quality Cordial microphone cables, which guarantee a reliable connection and optimum sound transmission.
Fame Audio Orbital Sub 10 Overview:
active subwoofer
with 10-inch polypropylene woofer driver
suitable for recording, mixing and mastering in all genres
perfect for home and project studios
downfired (downward-facing speaker cone)
bass reflex port on the underside
Inputs (L/R) each with XLR, 6.35 mm TRS jack or RCA (unbalanced) connections
200 Watt Class-D power amplifier
Infinitely variable input amplification via input gain control
Frequency response from 30 Hz to 200 Hz
selectable crossover frequency between 50-130 Hz
Switchable high-pass filter at 80 Hz
180° phase rotation switchable for easier placement in the room
Magnetically shielded
suitable woofer extension for the Fame Orbital 205S, 207S or 208S
can also be combined with active studio monitors from other manufacturers
Adam Audio T7V Overview:
U-ART 1.9" Accelerated Ribbon Tweeter
allows long working hours with little fatigue
extended dynamic range
direct, almost attack in the high frequency range even with complex transients
HPS waveguide from the S series
Reduction of early reflections on surfaces of eg. mixing consoles, desks, etc.
Lightweight polypropylene construction of the woofer
excellent impulse response even at high sound levels without breaking up the cone
high resolution of the stereo image
generously dimensioned bass reflex ports at the rear
Low-compression bass reproduction
Unadulterated output in a wide frequency band
powerful, compression-free sound reproduction even at very high sound levels
DSP-controlled crossover
undistorted output without interference between the drivers in the critical mid-range
Simple room acoustic adjustment options via high- and low-shelf filters
enables optimal adaptation to acoustically difficult listening environments or individual preferences
acoustically optimized cabinet geometry
compact cabinet dimensions
Cordial CFM 3 MV microphone cable overview:
Length: 3m
XLR to XLR
AWG 24
Conductor construction: 28 x 0.10
Material: CU bare
Conductor resistance: 85 Ohm/km
Shielding: Conductors made of bare copper wires
Capacitance: 95 pF/m
Diameter: 5.8 mm
Weight: 47 g/m
Conductor insulation: PE
Cordial EM 3 FM microphone cable overview:
Length: 3m
XLR to 6.35mm jack
AWG 24
Conductor construction: 28 x 0.10 mm
Material: CU bare
Conductor resistance: 53 Ohm/km
Shielding: Conductors made from bare CU wires (spiral shield, 95 % coverage)