Intellijel Dual ADSR

The Intellijel Dual Slide Based ADSR Envelope is an ADSR module. The circuit is based in part on the Roland SH-101 / System100m design with several enhancements. This module features manual GATE buttons, with three timing ranges: (1 second, 10second, 1minute A/D times). Normal and inverted outputs, with an end of decay (EOD) logic output and cycle mode (which GATE logic control) are included. This module features dynamic control of the envelope output level (each ADSR is routed through a linear VCA and the control is normalled to +5V via the LEVEL jack. You can patch another control source like an LFO or VELOCITY level from a keyboard to this jack.

The main features of the Intellijel Dual Slide Based ADSR Envelope include:

• Manual GATE buttons
• Three timing ranges: (1 second, 10second, 1minute A/D times)
• Normal and inverted outputs
• End of Decay (EOD) logic output
• Cycle mode (which GATE logic control)
• Retrig input (allows re-triggering of the envelope if source gate held high)
• Dynamic control of the envelope output level (each ADSR is routed through a linear VCA and the control is normalled to +5V via the LEVEL jack. You can patch another control source like an LFO or VELOCITY level from a keyboard to this jack
• Width: 14HP
• Max Depth: 38mm
• Power: 60mA @ +12V; 49mA  @ -12V