Klotz LX5-3X1K1-20.0 DMX-Kabel 20 m

Specifications:

• Insulation: Foam-Skin PE
• Outer diameter: 6 mm
• Min. bending radius: 30 mm
• Operating temperature: -40 °C/+85 °C
• Halogen-free: according to IEC 60754-1
• Conductor resistance: < 85 Ω/km
• Capacitance:
• Core/core: 47 pF/m
• Characteristic impedance: 110 Ω
• Nom. Attenuation [dB/100 m]:
• 1 MHz: 2.3
• 3 MHz: 3.9
• 10 MHz: 6.9
• Insulation resistance: > 10 GΩ x km
• Test voltage:
• Core/Core: 1200 V
• Core/screen: 500 V

The Klotz LX5-3X1K1-20.0 with 20 m length is a professional DMX cable that has numerous advantageous features. Especially its high noise immunity makes it an absolutely recommendable accessory. For this purpose, it is made of OT206PB wire and equipped with high-quality three-pin block XLR connectors. For absolutely reliable transmission of digital DMX lighting control signals.

Cable by the meter: OT206PB

The blue OT206PB is a reliable AES/EBU cable, which offers protection against interferences due to its symmetrical signal routing by tightly stranded wire pairs and a double shielding of AL/PET foil, tinned copper braid and tinned copper braid. This guarantees extra good and undistorted signal transmission. Excellent performance is also ensured by its good workmanship and outstanding electrical values. A robust, but at the same time flexible PUR jacket withstands heavy use, but at the same time is easy to lay and wind.

Klotz connector

The cable is rounded off by a three-pin XLR male and a three-pin XLR female connector in the usual excellent Klotz quality. They are durable, feature a plastic grommet as well as silver-plated contacts for good conductivity.

Made in Germany

Every Klotz cable is manufactured in Germany and subjected to scrupulous inspection. This ensures lasting quality and superior sound characteristics.