Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
You have placed the following items into your shopping cart
Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
The Korg SQ-1 2x8 Step Sequencer may be compact in size but it has a huge range of functionality. It's large wealth of connection jacks allow it to easily be connected to the MS-20W and other various synthesizers.
The SQ-1 provides two channels (A and B) of 8 step sequencing that can operate consecutively, or be used in many other modes. For example, you can run A and B one after the other to function as a 16-step sequencer, and then ignore the order and make the steps play randomly. Or you can use A and B to control different parameters as they run in parallel. From simple sequences to complex changes, you can choose from a variety of modes to suit your needs.
The 2 x 8 step buttons can be used to turn notes on/off, or if you use the MODE button, it will switch their function. This opens powerful possibilities such as letting you “perform” the sequence itself, as on a volca unit.
The SQ-1 connectors include two CV/GATE OUT channels, the standard MIDI OUT and USB MIDI, littleBits out (to connect to the littleBits synth kit by littleBits Electronics Inc.) and the SYNC IN/OUT channel that allows you to connect to the volca series and monotribe.
The SQ-1 is housed in a compact, sheet-metal body making it very sturdy and durable. The unit can be powered by either two AA batteries or over USB bus power.
The main features of the Korg SQ-1 2x8 Step Sequencer include:
Korg SQ-1 Step-SequenzerI bought this to sequence my guitar pedals and my Make Noise 0-coast and it works wonderfully well. Of course pattern chaining would've been nice for creating longer sequences but for its price and portability, this is a great piece of kit
This gadget is very versatile, but remember to connect the usb to your computer!! Direct the DAW midi clock to SQ-1 Control as this is easiest way to sync your work. Drive synths in CV duty mode for unique loops generated by step trigger/ note/ slide/ filter level change in 1/16th steps although be prepared to sample off your audio for these as very difficult to retrieve settings once powered off. Try selecting 3V (linear mode) for filter control instead of 5V to keep oscillators in response range. If you have compatible Korg or other equipment e.g. Roland Analogue Suite, you will not regret purchasing. In a league of it's own!!
This is a great little piece of kit. At only 16 steps capacity is small by modern standards, but these can be used as two 8 step sequencers running in parallel, and connectivity is good for both CV/Gate and USB MIDI. It is a unique device, and at the low price is a no brainer!
I bought 2, so I can run poly-rhythms. That works really well an wouldn't be an option for more expensive sequencers.
They sync together perfectly...once you know how to set the time divisions...which isn't in the manual...
Default mode has the SQ-1 trying to double the tempo of an incoming clock, so some unpredictable results unless it's fed anything but a continuous steady pulse.
In global setup putting the Sequencer Mode knob in positions 4,5 or 6 gives a one step per pulse response which follows any uneven rhythm.
Can use a Gate output on one unit into the sync-In of the second.
The A and B channels are always locked to the same speed and mode...but I have two SQ-1 which solves that.
All button settings are lost on power down (global settings saved) so that interesting poly-rhythm needs to be re-entered.
Maximum tempo in standalone is rather pedestrian. Can configure things so that unit 2 runs at double speed...but really looking at external clock.
(didn't try at audio frequencies...yet...it's digital so there will be aliasing...if it's possible)
The knobs are very fiddly, especially when covering 5V...difficult to hit the right semitone when quantised and would even jumped to the next semi-tone a couple of times without being touched..... would make the units difficult to work with in a live situation.
...and with its metal chassis it looks and feels great, plain practical and brick like...better in real life than in pictures.
Lasted a couple of hours or so on supplied batteries, but got a usb plug socket with 3 outputs which will run 2 SQ-1s and a keyboard.
