Fame Audio Orbital 208S

Impressive sound experience

As with all models in the Orbital series, great importance was attached to high-quality components: The woofer drivers made of polypropylene provide a fast, crisp response in the bass and fundamental range. Through the careful selection of the driver, a pronounced midrange reproduction could be achieved, whereby especially the critical range between 200 and 400Hz is presented cleanly and differentiated.

A distortion-free, transparent and clear reproduction of the presence and treble range was ensured from the outset by the selection of a high-quality dome tweeter. This makes the loudspeakers of the Fame Orbital series also suitable as the basis of a stereo or surround setup calibrated with room correction software from Sonarworks or Dirac.

The modern drivers with high efficiency do not require a high power amplifier: Even the single speaker Orbital 205S achieves 102dB SPL peak in the near field at 1m - more than enough head room for every workplace.

The active crossover and the biamping power amplifier were also developed with special care, so that the range around the crossover frequency at 2.7 kHz remains completely transparent and highly resolved. Especially the overtone spectrum of e.g. electric guitars or woodwinds is transmitted naturally and unaltered.

For a focus on the bass range and higher monitoring levels respectively larger listening rooms, the larger models of the Orbital series, 207S and 208S, with their 6.5" and 8" woofers are available.

Sophisticated equipment for a professional result

The Fame Audio Orbital studio monitors are equipped with effective tools to adapt to common application scenarios.

The Acoustic Space filter helps clear out masking effects in the midrange, such as those caused by eg. Table reflections. Keep your midrange clean and hear what's actually happening. Prevent fatigue and mixing errors.

Treble EQ allows you to raise or lower the treble band from 10kHz. Adjust the treble response of your monitoring system to suit your personal taste or spatial conditions, depending on how much acoustic attenuation you've applied.

Unobtrusive, timelessly chic, but still unique, the Fame Audio Orbital presents itself - and there is a reason for this: The front panel of the speaker is designed for optimal guidance of the sound waves; the waveguides and tweeter and woofer realize the most point-like radiation pattern possible and the surrounding room is excited to vibrate only to a small extent. If you choose your listening position relaxed in a stereo triangle, you will benefit from a high degree of freedom of movement and at the same time only minimal interference from reflections from ceilings and walls.

The connections of the Orbital speakers are in balanced jack, XLR and unbalanced RCA format. Connect the speakers to any audio source, connect eg. your audio interface via the TRS jack connectors, your DJ controller or any line-level signal via the RCA jacks, or the DI-out of your digital multi-effect or workstation via the XLR connectors.

Manufactured by:

• MUSIC STORE professional GmbH
• Fame Audio
• Istanbulstr. 22-26, 51103 Köln
• Deutschland
• info@musicstore.de