Noise Engineering Soleo Vero
is a
digital tuner
for up to three connected oscillators with
optical scaling
. First you determine the desired note using the two LED scales in Soleo Vero, then you set the oscillator of the selected input to the corresponding frequency. If there is an exact match, there is an optical feedback and you proceed in the same way with the other two tone generators. In seconds you can adjust up to three VCOs without having to listen to them beforehand. A very practical approach.
Noise Engineering Soleo Vero at a glance:
Eurorack module
three-channel tuner
Easy tuning and scaling of optical control
Determines the frequency from the audio output of the connected oscillators.
4 TE width / 20 mm depth
+12 V: 42 mA / -12 V: 5 mA
Soleo Vero demo: Visual strobe tuner for modular synth performances
The visual feedback for acute accuracy is stunning. The fact that there is a wide range of octaves is a must in the world of modular. My only gripe is the fact that it is needed to tell in advance which note you want to check, and that a single button to scroll through the 12 semitones is a bit tedious.
0 from 0 found this review helpful
You have already rated this review.
Was this review helpful?
You have already reported this review.
Report this review
Delete this review
Are you sure you really want to delete this review ?