Black Magic Design HyperDeck Studio 4K Pro

The BlackMagic Design HyperDeck Studio 4K Pro:

• 2G SDI inputs and outputs
• 12G loop-through output
• HDMI input and output
• Dual SD card slots
• Dual SSD hard drive slots
• Record and output files in H.264/5, ProRes and DNx in all SD, HD and Ultra HD standards up to 2160p/60.
• Metal seeker with clutch
• Control via 16 button control panel, seek controller or RS422
• Output of fill and key signals up to 1080p/60 via 12G-SDI outputs
• HDR support
• SD, HD, 2K DCI, UHD and 4K DCI (via USB-C 3.0)
• Integrated clock and timecode generators
  
• 2.2" LC display
  
• USB-C (up to 5 Gbit/s) for recording to external drives
  
• Connected to a computer via the USB-C port, your HyperDeck Studio 4K Pro acts like a webcam
  
• 10 Gbit/s Ethernet port
  
• Redundant power supply via 2x AC power connectors or 4pin XLR connector for external 12 V DC power supply
  

Technical data

Connections

• SDI video inputs: 1
• SDI video outputs: 2
• SDI monitor outputs: 1
• SDI rates: 270 Mbit; 1.5 G; 3 G; 6 G; 12 G
• HDMI 2.0 video inputs: 1
• HDMI 2.0 video outputs: 1
• built-in speaker: 1 mono
• Audio output: 1x 6.35 mm headphone jack
• Display: 2.2-inch LCD
• Time code connections: 1 XLR input, 1 XLR output
• Reference Connectors: 1 BNC Input, 1 BNC Output For Tri-Sync or Black Burst
• SDI audio inputs: 16 embedded audio channels
• SDI audio outputs: 16 embedded audio channels
• HDMI audio inputs: 8 embedded audio channels
• HDMI audio outputs: 8 embedded audio channels
• Remote control: 1 RS-422 input, 1 RS-422 output
• Recorder configuration: via user interface or Blackmagic HyperDeck Ethernet Protocol
• Ethernet: 10 Gbps
• Computer interface: 1 USB-C 3.0 Gen 2 (up to 10 Gb/s) for recording to external drives, webcam output, software configuration and updates

Standards

• SD video standards: 525i/59.94 NTSC; 625i/50 PAL
• HD video standards: 720p/50; 720p/59.94; 720p/60, 1080i/50; 1080i/59.94; 1080i/60, 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60, 1080PsF/23.98; 1080PsF/24; 1080PsF/25; 1080PsF/29.97; 1080PsF/30
• 2K DCI video standards: 2Kp/23.98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29.97 DCI; 2Kp/30 DCI
• Ultra HD Video Standards: 2160p/23.98; 2160p/24; 2160p/25; 2160p/29.97; 2160p/30; 2160p/50; 2160p/59.94; 2160p/60
• 4K DCI Video Standards: 4Kp/23.98 DCI; 4Kp/24 DCI; 4Kp/25 DCI; 4Kp/29.97 DCI; 4Kp/30 DCI
• SDI compliance: SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M Level A and B, SMPTE 2081-1, SMPTE 2081-10, SMPTE 2082-1, SMPTE 2082-10, SMPTE 2084 and SMPTE 2108-1
• Supported SDI metadata: HD RP188 and Closed Captioning CEA-708. HDR metadata is supported via SDI.
• Supported HDMI formats: 525i/59.94 NTSC; 625i/50 PAL, 720p/50; 720p/59.94; 720p/60, 1080i/50; 1080i/59.94; 1080i/60, 1080p/23.98; 1080p/24; 1080p/25; 1080p/29.97; 1080p/30; 1080p/50; 1080p/59.94; 1080p/60, 2Kp/23.98 DCI; 2Kp/24 DCI; 2Kp/25 DCI; 2Kp/29.97 DCI; 2Kp/30 DCI, 2160p/23.98; 2160p/24; 2160p/25; 2160p/29.97, 2160p/30; 2160p/50; 2160p/59.94, 2160p/60, 4Kp/23.98 DCI; 4Kp/24 DCI; 4Kp/25 DCI; 4Kp/29.97 DCI; 4Kp/30 DCI
• Audio sampling: Standard television sampling rate of 48 kHz and 24 bit
• Video sampling rate: 4:2:2 YUV
• Color accuracy: 10 bit
• Color spaces: Rec. 601, Rec. 709, Rec. 2020. 33-point 3D LUTs can be applied to SDI monitor output
• HDR support: Hybrid Log Gamma, ST2084 300, ST2084 500, ST2084 800, ST2084 1000, ST2084 2000, ST2084 4000, ST2084
• Multirate support: Automatic detection of SD, HD, 6G-SDI and 12G-SDI.
• Copy Protection: No copy protected HDMI sources can be recorded via the HDMI input. Always check copyright before recording or distributing content.

Media

• Media: 2x 2.5-inch drive bays; 2 SD card bays; 1 USB-C 3.0 Gen 2 expansion port for external recording in SD, HD, 2K DCI, Ultra HD and 4K DCI
• Media type: SATA-II or SATA-III 2.5-inch solid-state media UHS-I and UHS-II SD cards
• Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems

Supported codecs

• ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime for all formats up to 2160p/60.
• Playback only in ProRes 4444 QuickTime up to 1080p/60; automatic distribution of fill-and-key signals via SDI outputs A and B
• DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF in 720p and 1080p HD formats up to 60 fps DNxHR HQX, DNxHR HQX MXF, DNxHR SQ, DNxHR SQ MXF, DNxHR LB, DNxHR LB MXF in 2K DCI and 2160p formats up to 60 fps
• H.265 SDI 4:2:2 10 bit, H.265 High 4:2:0 10 bit, H.265 Medium 4:2:0 10 bit, H.265 Low 4:2:0 10 bit in all 2160p formats up to 60 fps
• H.264 SDI 4:2:2 10 Bit, H.264 High 4:2:0 8 Bit, H.264 Medium 4:2:0 8 Bit, H.264 Low 4:2:0 8 Bit in all progressive formats up to 1080p/60

Control

• Integrated control panel: 16 buttons, seek controller with electronic clutch and 2.2-inch colour display for transport and device control
  
• External control: RS-422 deck control, SDI start/stop, timecode run. With Blackmagic HyperDeck Ethernet Protocol Supports remote file uploads via FTP
  

Included Software

• Blackmagic OS
• Blackmagic HyperDeck Setup
• Product software upgrades loaded at start-up or via Blackmagic HyperDeck Setup via USB port

Operating Systems

• Mac Catalina 10.15, Mac Big Sur 11.1 or higher
• Windows 10, 64 bit

Screens

• Built-in 2.2-inch LCD for monitoring video, audio and timecode, and menu settings
• LED indicators around SSD bays and LED indicators above SD card bays

Power requirements

• Power supply: 2 integrated AC power supplies for 100?240 V, 50/60 Hz; 1 four-pin XLR socket for external 12V DC power supply or battery charging
• Power consumption: 100 watts maximum

Physical Specifications

• 1 rack height unit
• Dimensions: 482 x 236.4 x 44.2 mm
• Weight: 2.53 kg

Environment

• Operating temperature: 0 - 40°C
• Storage temperature: -20 - 60°C
• Relative humidity: 0 - 90% non-condensing