With slight minimal scratches, otherwise like new, packaging used
DMX controllable flame effect
Incredibly realistic effect
Flame height: 150 cm
Robust design
Two blowers
Color change and color fading
Electronic dimmer (0-100%)
Built-in fuse and on/off switch
24 powerful LEDs 3 W high-power 3in1 TCL RGB (homogeneous color mixing)
Operable in 5 CH DMX mode
Controllable via stand-alone; DMX; radio remote control
Already pre-programmed with Light'J; LED PC-Control 512
4-digit 7-segment LED display
The FL-1300 Flamelight with DMX is a DMX controllable flame effect with RGB LEDs. Thanks to the 24 x 3W RGB LEDs, an incredibly realistic effect is achieved. The flame effect achieves a flame height of 150cm and conjures decorative lighting effects on your stage. The 24 x 3W RGB LEDs each create a realistic effect that you can also use for your exhibition or for other decoration possibilities.
This flame effect impresses with a robust design. It has two blowers. You can operate the FL-1300 in standalone mode or optionally via DMX. Convenient addressing and further settings are made via an integrated control unit with LED display and four operating buttons. The Flamelight has various functions. These include: Dimmer, Auto modes and speed settings.
In addition, a wireless remote control is included for convenient remote control of the flame effect. The functions and settings are selected via the control unit with LED display and four operating buttons.
Technical data
Power supply: 100-240 V AC, 50/60 Hz
Total connected load: 140 W
Power connection: power input IEC (M), power connection cable with protective contact (included)
LED: 24 x high-power 3 W 3in1 TCL RGB (homogeneous color mixing)
Beam angle: 10
DMX channels: 5
DMX input: 1 x 3-pin XLR (M)
DMX output: 1 x 3-pin XLR (W)
Control: stand-alone, DMX and radio remote control
