Activate social media for sharing. Data will only be sent via social networks with your consent.
Tell a friend
Write a review
Seen a better price?
MORE THAN 3.000 PRODUCT VIDEOS
EASY RETURN
3 YEARS WARRANTY
55.000 PRODUCTS READY TO SHIP
Ortofon - 2M Black Premounted on SH-4 Black
HiFi pickup for highest demands
Output voltage at 1000 Hz, 5 cm/sec: 5 mV
Channel balance at 1 kHz: 1 dB
Channel separation at 1 kHz: 26 dB
Channel separation at 15 kHz: 15 dB
Frequency response: 20 - 20000 Hz + 2 / - 0 dB
Compliance, dynamic, lateral: 22 µm/mN
Pickup type: Nude Shibata
Radius of needle tip: r/R 8/40 µm
Pickup force range: 1.4-1.7 g (14-17 mN)
Tracking force, recommended: 1.5 g (18 mN)
Scanning angle: 20
Internal impedance, DC resistance: 1.2 kOhm
Internal inductance: 630 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 150-300 pF
Weight: 7.2 g
Pickup Color: Black/Black
Attention: HiFi cartridges and HiFi needles are not suitable for scratching or back cueing!
Important note: Pickup systems are excluded from exchange!
Important note: Pickup systems are excluded from exchange!
Ortofon - 2M Black Premounted or SH-4 Black at a glance:
The Ortofon 2M Black Premounted or SH-4 Black cartridge represents the flagship of the 2M series and was in this variant premounted on an Ortofon SH-4 headshell. furthermore, it was provided with a Shibata diamond, whose slim cut ensures a large contact surface to the record groove. This results in a particularly detailed reproduction that represents the entire sound spectrum of a record and thus meets the highest demands. With an output voltage of 5 mV, it offers optimum sound reproduction and sound accuracy. The bodies of the 2M series are made of Hopelex, which brings a high rigidity and prevents unwanted resonances during the output. pickup of the 2M series also features Ortofon's Split Pole Pin technology, whereby moving magnet systems achieve a frequency response that is as flat as that of moving coil pickups.