Two-channel guitar amplifier with 180 watts of power and Two Notes speaker simulation
In pedal format, made in England
Analog tube preamp and Class D power amplifier
180 watts of power @4 ohms (approx. 90 watts @ 8 ohms and approx. 45 watts @ 16 ohms)
Preamp with three CV4014 tubes and one EC900 tube
Vintage channel for traditional, British Blues rock sounds
Hotrod channel for classic rock and metal sounds
Each channel with its own gain and master controls
Common 3-band tone control for both channels
Integrated reverb effect
Integrated Two Notes Torpedo embedded speaker simulation with six memory locations for Impulse Responses (IRs)
Push switch for signal routing of the speaker simulation
Serial effects loop
USB connection
Balanced Line-Out (TRS connector)
Balanced "Cab Sim" XLR output
Headphone jack
Speaker jack for guitar cabinets with at least 4 Ohm impedance
Connector for optionally available footswitch
Fan cooling with on/off switch for the fan
Sturdy aluminum cabinet with gold finish
Guitar amp with classic Brit sounds in pedal format.
The Victory Amplifiers V4 The Sheriff Guitar Amp delivers typically British sounds between blues, rock and metal as a handy amp for the Pedalboard. While the analogue, two-channel tube preamp promises organic clean and overdrive sounds with rich overtones and lively dynamics, the modern Class D power amp with up to 180 watts of power ensures stage-ready volume reserves. In addition to the integrated reverb effect, the V4 The Sheriff Guitar Amp also features a Torpedo embedded speaker simulation from Two Notes, whose impulse responses guarantee natural sound experiences when the guitar sound is picked up directly via the balanced Outputs.
Tube preamp for organic Brit sounds
The two-channel preamp of the V4 The Sheriff Guitar Amp uses three CV4014 tubes and one EC900 tube to deliver typical Brit sounds with lively dynamics. In the Vintage channel, the amp delivers the coveted British Blues-rock sounds of the sixties, which react lively to the playing style and assert themselves perfectly in the Mix with well-dosed midrange crunch. The Hotrod channel, on the other hand, stands for hot distortion sounds with unmistakable Eighties character and perfect suitability for dirty riffs and shredded solos. In addition to dedicated gain and master controls for each channel, the V4 The Sheriff Guitar Amp features a common 3-band EQ for adjusting the sound.
The Victory V4 The Sheriff Guitar Amp comes in a convenient pedal format and delivers top-notch blues, rock and metal sounds with typical Brit character with four tubes and two channels.
Reverb and effect path
Victory Amplifiers also equips the V4 The Sherrif Pedal Amp with a harmonically tuned digital reverb effect. Depending on the position of the reverb control, the effect convinces with a subtle spaciousness of the guitar sound or a lush reverb for epic solo sounds. and further effects can be integrated directly into the signal path, the amplifier also comes with a serial effect path.
Two Notes Torpedo Embedded
The integrated Two Notes Torpedo speaker simulation of the V4 The Sherriff also turns out to be a practical detail for use on stage and in Studio. A total of six Impulse Responses, optimally adapted to the sound character of the Sheriff amp, promise a particularly natural sound experience when directly picking up the guitar signal. It is possible to use the IR Speaker Sim not only via the dedicated "Cab Sim" XLR output but also to route it to the balanced line out. While the USB port can be used to load custom IRs onto the Sheriff, the headphone jack allows for silent electric guitar playing with natural sound.
The rear panel of the V4 The Sheriff guitar amplifier presents all connections in a clear arrangement.
180-watt power amplifier
Last but not least, the Victory V4 The Sheriff Guitar Amp comes with a 180-watt Class D power amp that has enough volume reserves for band rehearsals and gigs. The fan cooling of the power output stage can be switched off for recording sessions in a quiet studio environment to avoid unwanted noise.