Module to adapt the Moog Mother 32 to the 1V / Oct standard
Can also be used for other devices with the same control voltages
The Erica Pico MScale is a precision scaler module for Eurorack format modular synthesizers. The module is designed to adapt the Moog Mother 32 and similar devices to the Eurorack standard control voltages 1V / Oct. The Mother 32 requires -5V to + 5V on the 1V / Oct input to operate fully, while the Eurorack standard is 0V to + 10V. Erica Pico MScale adjusts for these differences. The upper section of the module adds 5V to the control voltage and the lower subtracts 5V. This allows the Moog Mother 32 to control a Modular system and vice versa.
Solidly built module, which solves the 5-octave problem between the Mother-32 and many other 1V/Octave-gear. A little bonus: one can actually use this module to lower or up any CV-signal by 5 volts! From deep bass to high melodies (or vice versa) with a simple cable: NICE!
Well built small 3HP product as a simple but effective utility module for your Moog Mother 32. Well priced, really well priced from DV247, a must if you have a Mother-32 integrated into a Eurorack set up.
Needed to convert my Roland System 500 (-5 to +5v) to the eurorack 0-10v standard. This module did the work perfectly right out of the box! Works with Moog Mother 32 and all other modules on this standard. Nice!