Compatible with QuickDMX - the wireless DMX system from Eurolite
Phantom powered USB socket for QuickDMX, CRMX and WDMX receivers (accessories)
Control panel with LED display for easy configuration
Continuous color mixing, color change, dimmer and strobe effect
Equipped with 6 x 4W 4in1 LED in red, green, blue and white colors
Swivel mounting bracket
Mains input and output for easy interconnection of up to 8 devices
LED: 6 x high-power 4 W 4in1 QCL RGBW (homogeneous color mixing)
Operable in 2; 4; 5; 6; 9 CH DMX mode
The device is cooled by passive convection cooling
Controllable via stand-alone; DMX; music control via microphone; QuickDMX via USB (optional); W-DMX by Wireless Solution (optional); CRMX by LumenRadio (optional)
Already pre-programmed with LED PC-Control 512; EASY SHOW; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE
Flicker-free projection
Effect: Stroboscope effect
The LED bar at a glance
The Eurolite LED BAR-6 QCL RGBW is a LED light bar with 6 x 4 Watt QCL LEDs. The installed QCL LEDs convince with their brightness, as well as the brilliant color output (RGBW). Due to the color spectrum of the LED bar, almost any color can be created. The Eurolite LED BAR-6 QCL RGBW can be operated in standalone mode or via DMX (2, 4, 5, 6 or 9 DMX channels). In addition, the 60 cm long LED bar is compatible with QuickDMX - the wireless DMX system from Eurolite. Accordingly, it has a phantom-powered USB socket for QuickDMX, CRMX and WDMX receivers, so DMX signals can be received without cumbersome cables.
Due to the small dimensions of the bar, it can also be well hidden in small corners. The LED bar can be mounted hanging or standing. If the LED bar is used in a TV/photo studio, the LED BAR-6 QCL shines with a flicker-free projection. The cooling works passively with a convection heat sink. Since no fan has been installed in the LED bar, the operating noise is reduced to a minimum.
Technical data:
Power supply: 100-240 V AC, 50/60 Hz
Total connected load: 15 Watts
Protection class: IP20
Power connection: power supply cold devices (M) built-in version power connection cable with safety plug (included)
Power output: 1 x IEC (W) built-in version
Lamp type: LED lamp
LED: 6 x high-power 4 W 4in1 QCL RGBW (homogeneous color mixing)
Flash rate: 0 - 20 Hz
DMX channels: 2; 4; 5; 6; 9
DMX input: 1 x 3-pin XLR (M) built-in version
DMX output: 1 x 3-pin XLR (W) built-in version
Cooling: Passive convection cooling
Control: Stand-alone; DMX; Music control via microphone; QuickDMX via USB (optional); W-DMX by Wireless Solution (optional); CRMX by LumenRadio (optional); LED PC-Control 512; EASY SHOW; LED EASY OPERATOR 4x4; LED EASY OPERATOR 4x6; LED EASY OPERATOR DELUXE