Your Feedback

Heritage Audio Tubesessor

Item: REC0016244-000

Compare list
Recommend

Information on the disposal of old devices

Optical tube compressor with 5-stage side chain filter, stereo link & saturation function. Very variable basic sound. All product info

Standard Shipping (2-3 business days)

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
Free Shipping
from 69 €
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Heritage Audio Tubesessor

Heritage Audio Tubesessor Compressor - overview:

Mono opto compressor with tube amplification
Open, transparent and linear basic character
Very musical, noble and natural sounding compression
Very versatile from clean to fat and dirty
With ratios up to 10:1 also light limiting possible
Continuously adjustable Attack and Release with 2-stage automatic
5-stage Sidechain filter switchable: 80/160Hz highpass, 1/3kHz bandpass, 5kHz highpass
Input and output transformers replicas of AMI's classic types
Tube types: 1x NOS CK5755 and 1x 12BH7A
Stereo link function for coupling 2 units
Feedback tube and transformer saturation with 4 operating modes (Classic, Mild, Warm, Hot)
True Bypass

High-end refiner for all signal types

The Heritage Audio Tubesessor is an extremely flexible opto-compressor and preferably suitable for processing bass and voice. Inspired by classic tube designs, the Tubesessor has an almost dead straight frequency response, but refines the signal with glittering saturation artifacts depending on the level, giving it more punch, assertiveness, depth and expression. The intensity of the saturation can be increased in 4 steps.

Heritage Audio adopted the innovative Side Chain filter of the Successor for the Tubesessor after numerous very positive feedbacks. In addition to classic low cut modes at 80 and 160Hz, which counteract an over-response of the compressor in the bass range, 3 further filter curves are available: A bandpass at 1 respectively 3kHz in the control loop lets the compressor react only to the filtered frequency range, so that above all the overtone spectrum of eg. drums, snares or e-guitars can be reproduced. Drums, snares or electric guitars are copmimized and the rest of the signals pass the compressor unprocessed. Finally, the last position with high pass at 5 kHz ensures that only the treble band of the material is processed.