Your Feedback

Neumann M 150 TUBE

Item: REC0003342-000

Compare list
Recommend

Information on the disposal of old devices

The modern version of the legendary Neumann M 50, including tube circuit, PAD, low cut and very low equivalent noise level. All product info

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
Free Shipping
from 69 €
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Neumann M 150 Tube

Small diaphragm condenser microphone

Based on the legendary Neumann M 50
Ideal for recording instruments and orchestras
Polar pattern: omnidirectional
Pressure transducer capsule made of titanium
Tube circuit with low self-noise
Strong impulse fidelity
Scope of delivery
- Microphone M 150 Tube
- EA 170 elastic suspension
- Power supply unit N 149 A
- Mains cable
- Microphone cable KT 8
- Aluminum case

The Neumann M 150 Tube in use with an optionally available pop screen

Titanium capsule and innovative tube circuitry

The Neumann M 150 Tube is a unique small diaphragm condenser microphone designed specifically for orchestral recordings. It is based on the legendary Neumann M 50, which is often referred to as the ultimate microphone for orchestral recordings. Like its predecessor, the M 150 Tube uses a 12 mm small diaphragm capsule flush-mounted in a small sphere to create an omnidirectional pattern that becomes directional at higher frequencies. The ultra-thin diaphragm of the M 150's condenser capsule is made of titanium, a light but rigid metal, and is only 10 micrometers away from the counter electrode, which is also made of titanium. The result is a sound transducer with unparalleled impulse fidelity.

The exquisite capsule is protected by an acoustically open microphone basket, the same as the venerable M 50. The capsule signal is amplified by a tube circuit built around a subminiature triode selected for optimum transfer characteristics to ensure a low self-noise of only 15 dB-A and a lively sound. The M 150 does not use an output transformer, which could potentially distort the sound. Instead, the M 150 uses an ultra-transparent electronically balanced output stage that guarantees a dynamic range of 119 dB and ensures powerful, clear bass transmission even at the highest levels. Furthermore, this state-of-the-art output stage allows long cable runs of up to 300 m without transmission losses.

The M 150 is primarily designed for orchestral recordings, offering unparalleled realism and detail. Thanks to its unique "directional omnidirectional" polar pattern, outstanding impulse response and gradually increasing sensitivity from 1 kHz, the M 150 is the perfect microphone for DECCA tree recording techniques, including extended surround setups.

The scope of delivery of the Neumann M 150 Tube

Technical data:

Dimensions (H x W x D): 165 x 78 x 78 mm
Weight: 800 g
Field transmission factor at 1 kHz at 1 kOhm: 20 mV/Pa
Nominal impedance: 50 Ohm
Nominal load impedance: 1 kOhm
Equivalent noise level, A-weighted: 15 dB-A
Limit sound pressure level (tube characteristic) for k ' 0.5%: 114 dB
Limiting sound pressure level (tube characteristic) for k ' 5%: 134 dB
Dynamic range of the amplifier, DIN/IEC 651, for k ' 0.5%: 99 dB
Dynamic range of the amplifier, DIN/IEC 651, for k ' 5%: 119 dB
Maximum output voltage: 8 dBu
Power supply: N 149 A (included in scope of delivery)
Required connector:
- Microphone: DIN 8 F (included in scope of delivery)
- Power supply unit: XLR 3 F