Sputnik Modular 5-Step Voltage Source aus Demo

Sputnik Modular 5-Step Voltage Source is a multifunctional 5-step Sequenzer device for processing Eurorack control signals. The module adds, inverts, weakens and amplifies control voltages. CV signals, an offset can be added and the crossfade function can be used to switch between two CV signals. 5-Step Voltage Source processes both audio and CV signals.

The ones at Stages the Sputnik Modular 5-step Sequenzer

The Sputnik Modular 5-Step Voltage Source has four CV-Out channels (A-D) with five Stages . When a step is selected, the AD outputs produce a voltage defined by the controls. The CV outputs can be used to control oscillators, filters, LFOs and many more Module that process stepped DC voltages. Individuals Stages can be selected using the buttons in the Stage Select section. Triggers/gates/pulses are also possible as an option. Each stage has a PULSE OUT signal when the respective step/stage is active. They Stages have individual Pulse outputs and the ALL PULSE output generates a pulse as soon as one of the five Stages is triggered. Summarized the information about Stage Select and the CV and Pulse Outputs:

• five stage select switches with trigger inputs and stage selection buttons. The switches influence the length of the Sequenz
• ADDRESS is a CV input to control the extended stage selection.
• four rows (A-D) each with five voltage generators and individual CV or pulse outputs
• All Pulse Output

The Sequenzer Master Clock

The pulser section of the Sputnik 5-Step Voltage Source contains all control functions of a master clock, but can also be used as an independent clock submodule or LFO with two waveforms, pulse and sawtooth. The PULSE output is controlled via Trig. In triggered. The TIME parameter can be controlled via CV or manually and controls the Pulse speed ranging from .002 - 10 seconds per step. The generated pulse width is set via the LENGTH parameter. START and STOP determine the pulser activity. Here the compact data of the pulser section:

• Trig. In to trigger the pulser
• Pulser controls the rate between .002 and 10 seconds, Amount of the pulse is controlled manually or via CV input TIME
• LENGTH or pulse width is adjusted manually or via CV
• One pulse and one sawtooth output each
• Manually and CV controllable start and stop buttons