The Look Solutions Viper NT DJ Fog Machine is a 1300W fog machine, with a 5 litre tank capacity, a built-in timer, and operable via DMX. The Viper NT can be controlled via DMX 512, with the connections made via 5pin-XLR-plugs. The DMX start address can be adjusted and saved via the control panel. The machine can also be controlled with analog (0-10V) via a lighting desk or via XLR-remote (optional - not included). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %. The control panel with an LED-display and simple symbols allow for easy operation. It also protects the control buttons against dirt. Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced.
The main features of the Look Solutions Viper NT DJ Fog Machine include:
DMX as standard, analog and stand-alone-mode
Internal timer
Fog output adjustable in steps of 1% (0 - 99%)
Vaporizing fog generator
Power requirement: 1300W
Voltage: 230 V (50 Hz ) / 120 V (60 Hz)
Warm up time: Approx. 7 min
Fluid consumption: 120 ml/min at max. output; .35 ml/min at continuous output
Fluid tank capacity: 5 litre
Fog output: Adjustable in 99 steps
Output projection: Max. 15 m
Fogging time: Approx. 40 sec. at max. output; Continuous output at <50% output
Control: DMX 512; 0 – 10 V analogue; Stand-alone-mode
