Dunlop Dimebag Wah No. DB01, Dime Cry baby from Hell

The Jim Dunlop Dimebag Wah No. DB01 Dime Crybaby from Hell Guitar Effect Pedal, Wah Wah. Ultra Hot Rodded and tricked out wah.

The Jim Dunlop Dimebag Wah No. DB01 might just be the most flexible, powerful wah pedal ever. Designed in conjunction with the late Dimebag Darrell of Pantera, the DB-01 Crybaby From Hell gives you everything you need to do serious wah damage. “It's basically what I'd call a hot-rodded wah,” Dimebag explained. “It's pretty tricked out—it's got an extended sweep so you can get it to go more high-endy sounding and deeper too. There's a 6-way selector on the side so you can pick what frequency you're gonna play within. You've got a kick-in boost and LED indicators [Wah on/off, Boost on/off] at the back of the pedal—instead of at the front—so you can see them from the back of the stage. And it's got skateboard skid-tape on it instead of rubber so when you've got beer on your feet you won't slip off it. One other little trick is an extra input jack on the left-hand side of the pedal so you can go in and out of the DB-01 on just that side if you want. That way, if you're just using the wah, you don't have to loop a chord around the top of the thing, so it's less likely to get stuck under the pedal. I'm real proud of the CFH, man,” Dime concluded. “It sounds bad-assed and it looks bad-assed too. It's ready for war!”

The main features of the Jim Dunlop Dimebag Wah No. DB01 include:

• Ultra Hot Rodded and tricked out wah
• Controls: Adjustable "Q" control modulates frequency breadth of effect. Adjustable Volume Boost knob from 0 to + 17dB - Volume Boost On/Off switch, mounted on side (red LED indicates on). Fine Tune knob adjusts the toe down sweep range. Six-position knob selects frequency center of effect, mounted on side. Wah LED indicates Wah effect on. Two-position switch for second output jack function selection (located on main circuit board inside pedal).
• Input Impedance: 1 Megohm
• Bypass: Low noise class A, low source impedance, operational amplifier driver
• Signal To Noise: >102 dB A weighted
• Output: <1 Kohm
• Gain: At center frequencies of bandpass, ~ +15dB +/-10%, Q @ maximum, without boost
• Boost: Boost range relative to no boost, +. 1dB minimum to +17 dB, +/- 5%
• Switching: Noise free controlled by Carlingswitch
• Power Requirements: +9 VDC @ <2.5 milliamps, 5.5 mm x 2.1 mm positive barrel & negative center or standard 9 Volt battery