Turbosound iQ18B 18" Active-Subwoofer

• Frequency response: 50 Hz - 100 Hz (-3 dB) / 36 Hz - 100 Hz (-10 dB)
  
• SPL: 130 dB (peak)
• Crossover type: Active 1x 18" (460mm) LF driver
• Limiter: Peak, RMS
• Max. Output power 3000 W Class-D
• Protection against: short circuit, open circuit, overheating
  
• Input A/B: 2x combo jack / XLR
• Output A/B: 2x XLR input
• Ultranet input/link 2x RJ45
• Mixer section: 2x gain controls (channels A and B), 2x line
• EQ presets: high / low shelving
• Display: LCD 128 x 32, blue backlight
• Protective lock function for all settings
• A/D converter 24-bit, 44.1/48 kHz sampling rate
• Converter type 24-bit,Delta-Sigma signal 16 channels
• Latency <0.9 ms
• Dynamic range: 92dB
• Cabling: min. STP CAT5, max. 75m
• Power consumption: 200 W at 1/8 max. power
• Power supply: Neutrik PowerCon (input 20A, 15A link)
• Housing: birch wood, screwed / glued
• Voltage specifications: 220-240 V ~, 50/60 Hz (T 10 AH 250 V)
• Dimensions: (HxWxD) 691x533x559mm
• Weight 39,8kg
  

Turbosound iQ18B at a glance

Turbosound's IQ series is equipped with a very efficient and lightweight two-channel Class-D power amplifier from Klark Teknik. Control and management of the speaker system is handled by a sophisticated but easy-to-use digital signal processor. On the back of the speakers is the heart of the IQ series, the amplifier module. The numerous interfaces offer a wide variety of connections. The LCD display, the gain controls, and the encoder for intuitive access to e.g. level, EQ and feedback control are just a few of the useful features of the IQ series.

The iQ18B is a front-loaded 18" subwoofer ideal for mobile and fixed music and speech reinforcement applications. Also supported is Ultranet technology, which allows uncompressed audio and other information to be exchanged between ULTRANET-enabled products over a network line.