The Yamaha HS 7 subwoofer set offers a perfect combination of clear highs and powerful bass for home and project studios. The Yamaha HS 7 monitor delivers balanced and fatigue-free sound reproduction thanks to its 60W LF and 35W HF bi-amp system. The sound is complemented by the Fame Audio Orbital Sub 10, which accurately reproduces low frequencies with its 10-inch woofer and 200W Class D power amplifier.
The bundle also includes the height-adjustable Fame Audio DB 038 monitor stands and high-quality Cordial microphone cables, which guarantee reliable signal transmission.
Fame Audio Orbital Sub 10 Overview:
active subwoofer
with 10-inch polypropylene woofer driver
suitable for recording, mixing and mastering in all genres
perfect for home and project studios
downfired (downward-facing speaker cone)
bass reflex port on the underside
Inputs (L/R) each with XLR, 6.35 mm TRS jack or RCA (unbalanced) connections
200 watt Class-D power amplifier
Infinitely variable input amplification via input gain control
Frequency response from 30 Hz to 200 Hz
selectable crossover frequency between 50-130 Hz
Switchable high-pass filter at 80 Hz
180° phase rotation switchable for easier placement in the room
Magnetically shielded
suitable bass extension for the Fame Orbital 205S, 207S or 208S
can also be combined with active studio monitors from other manufacturers
Yamaha HS 7 Overview:
linear and balanced overall sound
pleasant sound for fatigue-free listening over hours
Adjustable input level
highest sound quality achievable with appropriate set-up
60W LF plus 35W HF bi-amp system for 95 power amplification
Room control and high-trim tone control
XLR and jack inputs for balanced and unbalanced signals
Fame Audio DB 038 monitor stand overview:
height-adjustable monitor stand
Rubberized, non-slip surface
dimensions of support plate: 23 x 23 cm
suitable for 5, 6.5, 7 and 8 inch speakers
Height: 0.67 - 1.13m
Weight: 3.5 kg
Cordial CFM 3 MV microphone cable overview:
Length: 3m
XLR to XLR
AWG 24
Conductor construction: 28 x 0.10
Material: CU bare
Conductor resistance: 85 Ohm/km
Shielding: Conductors made from bare copper wires
Capacitance: 95 pF/m
Diameter: 5.8 mm
Weight: 47 g/m
Conductor insulation: PE
Cordial EM 3 FM microphone cable overview:
Length: 3m
XLR to 6.35mm jack
AWG 24
Conductor construction: 28 x 0.10 mm
Material: CU bare
Conductor resistance: 53 Ohm/km
Shielding: Conductors made from bare CU wires (spiral shield, 95 % coverage)
