The Doepfer A-199V Spring Reverb is a spring reverb module for modular synthesizers in Eurorack format. Spring reverb systems have a characteristic sound behavior based on the mechanical properties of the springs used - such as signal delays, self-resonances, limited frequency range, acoustic resonance behavior, sensitivity to mechanical influences. In the Doepfer A-199, a spring system with three separate springs is used, which makes the reverb very "dense" due to the different properties of the springs. As a special feature, the module allows the reverb signal to be fed back to the input, whereby the feedback can lead to self-resonance of the system. As a further special feature the module has an Emphasis control with which middle frequency ranges (center frequency approx. 2kHz) can be additionally boosted. The ratio between the original and reverb signal at the mix output can be continuously adjusted with a mix control.
first of all I Love this module. It adds that little bit of seventies atmosphere or sci-fi elements to your sounds.Product is very good Doepfer standards and the spring Tanks also well made but there is a big But the cable provided is total pants. changed the cable for a shielded rca cable if you don't want it sounding like a mechanical mess but once this is done this sounds great .
0 from 0 found this review helpful
You have already rated this review.
Was this review helpful?
You have already reported this review.
Report this review
Delete this review
Are you sure you really want to delete this review ?