Dynaudio BM12 mkIII incl. ISOacoustic Stand

The Dynaudio BM12 mkIII Active Studio Monitor (Single) is an active studio monitor that sports an extended excursion 8” woofer and a 1.1” soft dome tweeter, both with aluminium voice coils. The lightweight aluminium design allows the drivers to move with greater ease and therefore react more quickly to incoming signals. This means the transient response of the BM12 MKIII is phenomenally fast and provides accurate and detailed reproduction.

The BM12 MKIII has a maximum SPL of 123dB and a frequency response of 38Hz-21kHz, greater than a lot of the completion in this class. The cabinet is made from 18mm MDF and has a rear-firing bass reflex port. The BM12 MKIII is powered by a 100W LF and 50W HF Class D amplifier (with a DSP crossover at 1500Hz) mounted in the back panel. There is also room correction EQ and level controls, as well as 60/80Hz high pass filters for marrying with a subwoofer. The Dynaudio BM12 MKIII inputs on balanced XLR.

The main features of the Dynaudio BM12 mkIII Active Studio Monitor (Single) include:

• Frequency Response: (+/- 3 dB) 38Hz - 21kHz
• Input level for 85 dB SPL @1m -14dBu RMS @ 0dB setting
• Input Impedance: 65kOhm each branch
• Power consumption: Idle: 15W Max: 130W
• Amplifier power: Tweeter: 50W Woofer: 100W
• Bass Principle Bass reflex
• Vent tuning frequency: 40Hz
• Internal Cabinet Volume: 13.6 litres
• Crossover Frequency: 1500Hz
• Crossover Slope: 6dB/oct
• Tweeter:
  • Esotec 28 mm/1.1” soft dome
  • Rear chamber
  • Magnetic fluid
  • 4 mm aluminium front
  • Pure aluminium wire voice coil
• Woofer:
  • 200 mm/8”
  • One-piece thermo formed polyprop cone
  • 75 mm/3” kapton coil
  • Neodymium magnet
• Weight: 12.5kg