Your Feedback

Millennia NSEQ-HF

Item: REC0016545-000

Compare list
Recommend

Treble band from Millennia's mastering EQ NSEQ. Air EQ for noble shine on voice & instruments; corner frequencies 4.8 - 21kHz. All product info

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
EASY
RETURN
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Millennia NSEQ-HF

Air EQ in mastering quality:

Treble and presence processing for instruments and voice
Gives the signal a noble high-end character
Discrete Class A signal path without transformers
21-step detented gain pot
Gain range switchable from -18/+18dB to -9/+9dB
Filter switchable between shelf and bell
Selectable balanced or unbalanced input
Handmade in California
Outstanding low noise figure (-106dBu)
Rugged housing
Minimalistic design

Technical data:

Maximum output level: + 21 dBu
Maximum input level (EQ Flat): + 20 dBu balanced, +14 dBu unbalanced
Maximum input level (EQ Full Boost): + 17 dBu
Frequency response: +0 / -3 dB below 2 Hz to above 300 kHz
Maximum cut/gain (21 steps gridded): +/-18 dB (+/-9 dB with range switch on)
Frequency centres - (peak/shelf selectable): 4.8 k, 5.8 k, 8.0 k, 10 k, 16 k, 21 k
THD + Noise: 20 Hz - 30 kHz, all EQ bands switched on < .009%, typical < .003 %
Common Mode Rejection Ratio: 10 Hz - 20 kHz, 100 mV C.M. > 60 dB, type > 80 dB
Slew rate, +21 dBu Out: > 50 volts per microsecond
Hardwired bypass switch? Yes
Input impedance: 25 kiloohms
Minimum output load impedance: 50 ohms
Recommended load: > 500 ohms
Output impedance: 5 ohms
EQ amplifier: Pure discrete class A J-FETs
Power Consumption: +210mA with all LEDs on

HF equalizer from the NSEQ-4 in 500 format.

The Millennia NSEQ-HF is a single-channel analogue equalizer in API 500 format and is based on the low-noise circuitry of the NSEQ-4. The fully discrete EQ focuses on the high frequencies. It offers a choice between shelving and peak filters and a selectable operating range of six different frequencies. The gain is adjusted via the associated potentiometer with 21 detented steps. In addition, there are switches on the front panel of the NSEQ-HF to adjust the gain range and an input switch to compensate for the 6dB level difference when using an unbalanced input signal. A true hardwire bypass ensures that the signal is not affected in any way when the unit is set to Off mode. The equalizer's housing is made of sturdy metal and the front panel is made of high-quality brushed stainless steel.