Low-noise instrument input with high input impedance for acoustic guitars, Bass or other instruments
Separate FX sends for both channels, additional FX loop for the instrument input
HPF and +48 V phantom power for microphone input
Signal/peak LEDs for both channels, clip LED for the effect
"FX MUTE" pedal for muting the effects
"MUTE ALL" pedal for muting the outputs
Balanced and unbalanced output
Operation with 9 V battery or mains adapter (not included)
Multi-effects pedal from LD-Systems
When you take the stage as a singer-songwriter or give a living room concert, your sound plays a decisive role. With the FX 300 from LD-Systems, you will impress from the very first second of your performance, even if there was little or no time for the sound check. The 2-channel multi-effects pedal is not only suitable for vocals and instruments, but is also a handy 2-channel mixer. And the best thing about it: the mute functions can be controlled via the pedals with your feet or hands. If you want to make an announcement, you can use the "FX MUTE" pedal to mute all effects so that your voice can be heard clearly without reverb or Delay and everyone in the room understands what you have to say. If you don't want the signal from your microphone or your instrument to reach the outputs, just tap "MUTE ALL". Extremely practical during breaks or at the end of your set.
The FX 300 offers 16 digital effect presets in 16-bit quality, 2 inputs with separate gain settings and a balanced and an unbalanced output. Thanks to the +48 V phantom power at the mic input, condenser microphones can also be used in addition to dynamic microphones. The high-impedance, low-noise instrument input is not only impressive with acoustic guitar or bass, but also with any other instrument. Thanks to the large headroom, you no longer have to worry about distorted signals. And even if there is no power socket to be found on stage, LD Systems has thought of a solution: the FX 300 can be operated for up to five hours using a 9 V battery.
Technical data
Microphone channels: 1
Mic input connectors: XLR/6.3 mm jack
Frequency response microphone channel: 50 - 20000 Hz
Gain range microphone channel XLR input: 42 dB
THD XLR input: <0.03 %
Impedance XLR input: 6000 Ohm
Phantom power: +48 V DC on XLR input
Microphone channel jack input Input type: electronically balanced
Gain range microphone channel jack input: 20 dB
THD jack input: <0.045 %
Microphone equalizer: +5/-8 dB @ 8 kHz
Microphone channel controls: FX SEND , Gain , Tone
Display elements microphone channels: Channel signal
Instrument inputs: 1
Gain range: 23 dB
THD: 0.03 %
Equalizer: +7/-8 dB @ 10 kHz
Channel insert: 1
Controls: FX SEND , Gain , Tone
Display elements: 3-color LED (SIG) , channel signal
Line outputs: 2
Line output connections: 6.3 mm stereo jack , XLR
XLR output level: Max. +17 dBu, balanced
Impedance XLR output: 150 Ohm
Output level jack output: Max. +5dB V, unbalanced
Impedance jack output: 40 Ohm
Digital effects processor: Yes
Number of presets: 16
Main section controls: DFX presets , FX MUTE , MIXOUT , MUTE ALL , Power
Main section display elements: Effect clip , FX MUTE , MUTE ALL , red LED (FX CLIP)
Power supply: 9 V block battery , External mains adapter 9 VDC / 250 mA (not included)
Ambient temperature ( in operation ): 0 - 40 °C
Relative humidity: <80 % (non-condensing)
Width: 160 mm
Height: 55 mm
Length: 163 mm
Weight: 0.65 kg
Other features: Preparation for microphone stand mounting
Behringer VIRTUALIZER 3D FX2000 
TC-Helicon VoiceTone E1 Echo & Tap Delay Vocal Effects Pedal