Item with 2 small scratches on the edges, otherwise in good condition
Full-colour laser
3,000 mW guaranteed power
Graphics capable
Max. Scan angle 50
Full-colour laser with analogue modulation
Extremely sharp and intense beams - approx. 4 mm beam diameter and a very low beam parameter of 0.9 mrad
Safety settings can be stored directly in the laser and then applied to all operating modes
Loop for multiple devices, power interlock, DMX and ILDA signal
Showeditor full version software license - show editor - upgradeable to show controller
Multiple control modes - automatic mode, DMX, ArtNet, LAN and ILDA
Laserworld DS-3000RGB MK4 at a glance:
The DS-3000RGB MK4 laser from Laserworld is a powerful full-colour laser with a guaranteed output of 3,000 mW, graphic capabilities and many other features. The Diode series is best suited for both beginners and professional users, as the devices are easy to use, very versatile, compact and lightweight.
Thanks to the full-colour lasers with analogue modulation, a wide range of hues and colour mixes can be created, which increases creative freedom immensely. With its graphic capability, the DS-3000RGB MK4 is not only suitable for simple laser beams, but can also display complex images and animations. The maximum scan angle of 50° allows wide projections and makes the device flexible for various applications. The laser's beams are extremely sharp and intense. With a beam diameter of about 4 mm and a very low beam parameter of 0.9 mrad, this model delivers exceptional precision.
DS-3000RGB MK4 rear panel with connectors
Safety
But safety is not neglected with this device either. Safety settings can be stored directly in the laser and are then valid for all operating modes. This allows the operator to ensure that the specified safety standards are maintained in every situation.
Connection options and control modes
The Laserworld DS-3000RGB MK4 systems have a built-in DAC network for show controller as well as show editor, but can also be controlled with any ILDA laser control software, like eg. Pangolin Qucikshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via an external ILDA interface (e.g. FB3). Furthermore, the devices have a standard integrated memory with pre-installed patterns that can be easily recalled via DMX, and automatic mode.
+ Integrated ShowNET including free laser show software.
The Laserworld DS-3000RGB MK4 (ShowNET) comes with an integrated ShowNET network interface and free laser show software. The integrated ShowNET allows direct control via ILDA and LAN. Besides DMX, it is also possible to retrieve single images and animations via ArtNet.
Self-created figures and shows can be stored on the included SD card and retrieved - even in automatic mode!
