Digital VCO module with tube circuit based suboscillators
Erica Synths Fusion VCO is a special VCO - it fuses the great tuning stability of a digital oscillator with the warm assertiveness of a tube circuit integrated as a suboscillator in the Fusion VCO. The waveforms can be continuously morphedmanually using the rotary knob and the control voltage. For even more flexible sound design in the modular system, external signals can be looped through via the audio input.
Merger at its core
Two double triode circuits work in Fusion VCO as suboscillators in foot positions of -1 and -2 octaves. For amazing results, the oscillators can be mixed together in many ways. The internal VCO can be replaced by externally applied audio signals. The perfectly tracking subosscillators are capable of neatly greasing even the thinnest input signal! So if you want to dive into super low frequencies and you want to have a modular system that stands out from the crowd, then this module is just the right one!
3 waveforms (sine, triangle and pulses) with VC morphing e.g. triangle morphs from sawtooth to ramp
precise tracking per 1V/octave tuning over 8 octaves
Tube-based suboscillators with -1 and -2 octaves
manual and tension-controlled mixing
adjustable suboscillator Waveshape
Dry/Wet Mixer (VCO/Suboscillators)
passive lowpass filter for extreme subbass sound
Audio input
signal level: up to 20V ptp
Output signal level: 10V ptp
VCO range: C1 - C8
Power supply: bipolar +-12V
Power supply: Tube heater: 60mA/30mA/300mA (+12V/-12V/6V AC)
Eurorack PSU configuration: 215m/185mA (+12V/-12V) (- short-term power consumption after power-on: +-250mA)
