Jog, shuttle and scroll modes selectable via dedicated buttons
XLR timecode connectors
Output of fill and key signals up to 1080p/60 via 6G-SDI outputs
HDR support
SD, HD, 2K DCI, UHD and 4K DCI (via USB-C 3.0)
Integrated clock and timecode generators
2.2" LC display
USB-C (up to 5 Gbit/s) for recording to external drives
Connected to a computer via the USB-C port, your HyperDeck Studio HD Pro acts like a webcam
1 Gbps Ethernet port
Control via keypad or RS-422
Redundant power supply via AC mains power or 4pin XLR jack for external 12 V DC power supply
Professional Broadcast Deck
Measuring one rack width, the BlackMagic Design HyperDeck Studio HD Pro offers all the features of the Plus model and more because it has room for extra features. The larger model has two SSD slots in addition to the two SD card slots of the smaller models. This allows your media to be used immediately for different HyperDeck Studio models. They have fancy transport buttons and a metal seeker with an electronic clutch that slows rotation in shuttle mode. Dedicated buttons let you determine the jog, shuttle and scroll modes of the seeker. The extra space on the rear panel was used to upgrade the timecode connectors to XLR connectors.
The new design HyperDeck Studios offer more codecs and quieter cooling. All models now support H.264, Apple ProRes and DNxHD files with PCM or AAC audio. The 4K model even supports H.265 files! You can drag recordings from your disc to any computer and edit the files with your favorite video software. For ISO recordings, internal timecode and clock generators allow you to synchronize multiple recorders. All these powerful features make HyperDeck Studios ideal for broadcast, live production and multi-screen digital signage.
Technical data
Connections
SDI video inputs: 1
SDI video outputs: 2
SDI monitor outputs: 1
SDI rates: 270 Mbit; 1.5 G; 3 G; 6 G
HDMI 2.0 video inputs: 1
HDMI 2.0 video outputs: 1
built-in speaker: 1 mono
Audio output: 1x 6.35 mm headphone jack
Display: 2.2-inch LCD
Time code connections: 1 XLR input, 1 XLR output
Reference connections: 1 BNC input, 1 BNC output; for tri-sync or Black burst
SDI audio inputs: 16 embedded audio channels
SDI audio outputs: 16 embedded audio channels
HDMI audio inputs: 8 embedded audio channels
HDMI audio outputs: 8 embedded audio channels
Remote control: 1 RS-422 input, 1 RS-422 output
Recorder configuration: via user interface or Blackmagic HyperDeck Ethernet Protocol
Ethernet: 1 Gbps
Computer interface: 1 USB-C 3.0 (up to 5Gb/s) for recording to external drives, webcam output, software configuration and updates
Multirate support: Automatic detection of SD, HD and 6G-SDI.
Copy Protection: No copy protected HDMI sources can be recorded via the HDMI input. Always check copyright before recording or distributing content.
Media
Media: 2x 2.5-inch drive bays; 2 SD card bays; 1 USB-C 3.0. expansion port for external recording in SD, HD, 2K DCI, Ultra HD and 4K DCI
Media type: SATA-II or SATA-III 2.5-inch solid-state media UHS-I and UHS-II SD cards
Storage media format: formats media in ExFAT (Windows/Mac) or HFS+ (Mac) file systems
Supported codecs: ProRes HQ QuickTime, ProRes 422 QuickTime, ProRes LT QuickTime, ProRes Proxy QuickTime in all formats up to 2160p/30 Playback in ProRes 4444 QuickTime only up to 1080p/60; automatic distribution of fill-and-key signals via SDI outputs A and B DNxHD 220x, DNxHD 220x MXF, DNxHD 145, DNxHD 145 MXF, DNxHD 45, DNxHD 45 MXF in 720p and 1080p HD formats up to 60 fps DNxHR HQX, DNxHR HQX MXF, DNxHR SQ, DNxHR SQ MXF, DNxHR LB, DNxHR LB MXF in 2K DCI and 2160p formats up to 30 fps H.264 SDI 4:2:2 10 bit, H.264 High 4:2:0 8 bit, H.264 Medium 4:2:0 8 bit, H.264 Low 4:2:0 8 bit in all progressive formats up to 1080p/60
Control
Integrated control panel: 16 buttons, seek controller with electronic clutch and 2.2-inch color display for transport and device control
External control: RS-422 deck control, SDI start/stop, timecode run. With Blackmagic HyperDeck Ethernet Protocol Supports remote file uploads via FTP
Included Software
Blackmagic OS
Blackmagic HyperDeck Setup
Product software upgrades loaded at start-up or via Blackmagic HyperDeck Setup via USB port
Operating Systems
Mac Catalina 10.15, Mac Big Sur 11.1 or higher
Windows 10, 64 bit
Screens
Built-in 2.2-inch LCD for monitoring video, audio, timecode and menu settings
LED light surrounds SSD bays and LED indicators above SD card bays
Power requirements
Power supply: 1 integrated AC power supply for 100?240 V, 50/60 Hz; 1 four-pin XLR socket for external 12V DC power supply or battery charging
