Hobbyists, tinkerers and prospective guitar builders, pay attention: Jack & Danny's Do-It-Yourself kits are the ideal opportunity to demonstrate your own craftsmanship with a self-made instrument! No matter whether it's your first instrument or a side project for the cold season: anyone who invests a lot of effort will be rewarded with an instrument that is easy to play and sounds clean. The kit contains all components required for the assembly in the form of body and neck, suitable hardware and of course the corresponding electronics!
The DIY Single Cut Set including body, neck, electronics, pickups and hardware.
Build your own instrument!
With the single cut DIY kit from Jack & Danny you get everything you need to build an electric guitar in a rocking singlecut design. Body, neck, electronics and hardware including mounting accessories are already pre-drilled and pre-wired, so that the assembly can be done without a fully equipped guitar workshop.
Body and neck are natural and can be varnished or waxed/oiled according to taste. All potentiometers and switches are pre-wired and only have to be soldered to the pickups, the switch of the output socket and the bridge bolt.
The two powerful Alnico humbuckers of the DIY Double Cut.
Alnico pickups and robust hardware
Amazingly powerful Humbucker pickups are part of the equipment of the do-it-yourself guitar. The two double coil pickups with Alnico magnets deliver classic rock sounds and convince with a traditional nickel cover, as could already be seen on the big model.
The necessary mounting accessories in the form of screws in various sizes, mechanisms, cover plates and strings are located on board the Jack & Danny Single Cut DIY Kit. Even the required hexagon socket wrenches are supplied.
The Jack & Danny DIY Single Cut Kit at a glance:
DIY - Do It Yourself! complete kit of a typical Singlecut guitar
all necessary parts included in delivery
Solid wood body
Maple neck
rosewood fingerboard with dot inlays
22 Medium Frets
2 Alnico Humbucker (including potentiometers and switches)
I haven’t built this kit yet however the body and the neck look great. A fantastic starting point to put your own mark on. The body may not have a flames maple too however it’s got some really nice grain that will pop out with a sunburst. Really looking forward to building this. What’s more the price of the kit is superb. I would say that it’s an intermediate kit as there’s a bit of drilling to do and the binding will make the body a little bit more involved however all in all I’m really pleased.
The product finish is fantastic, the price is unbeatable (they sell out fast) I was missing a piece from the kit (the jack input) I'm still waiting to hear back about that. Once that's sorted I would happily buy another kit in the future
Really enjoyable experience assembling the guitar, very worth while project for beginners to learn a bit more the hardware or as a fun side project for more experienced players. Certainly won't be the highest quality instrument in the world but more than worth the price.
Craftsmanship
Sound
Optic
Price/Performance
8 from 29 found this review helpful
You have already rated this review.
Was this review helpful?
You have already reported this review.
Report this review
Delete this review
Are you sure you really want to delete this review ?
