Two-channel 50 watt tube combo with 6L6 power amp, Celestion Zephyr speakers and innovative concept
Combo from the Blackstar St. James series
Innovative circuit design with Switching Power Supply (SPS) for typical tube sounds and a low weight
A 12" Celestion G12Z-70 Zephyr loudspeaker
Preamp with two ECC83 tubes
Power amplifier with two 6L6 tubes
50 watts of power, reducible to 2 watts
SAG mode for increased "sagging" of the power amplifier
Reactive load resistor allows operation without speakers for silent recording and silent stage setups
Channel I with Californian '60s Clean sound
Channel II with modern high-gain sound and voicing switch for a more relaxed sound image
Volume control for Channel I
Volume and gain controls for Channel II
Common 3-band tone control for both channels
Integrated reverb effect
Integrated Cab Rig DSP speaker simulation with memory for three Speaker Sims
Serial FX loop with switchable level (+4 dBV/ -10 dBV)
Balanced XLR cab rig output
Line out/headphone jack with cab rig speaker simulation
Integrated audio interface
USB port for audio interface and connection to Blackstar Architect software
Speaker connections for 8 ohm or 16 ohm impedance guitar cabinets
Blackstar 2-button footswitch included
Sturdy light walnut plywood cabinet with black tolex cover
Illuminated Blackstar logo
Innovative tube combo for stage, Studio and living room
With the Blackstar St. James 50 6L6 Combo, the amplifier specialists from Northampton present an innovative tube combo for electric guitar, which combines a pleasingly low Gewicht of just 12.8 kg with extensive features for stage and recording studio. Based on an innovative circuit that combines classic tube technology with a modern switching power supply, the guitar amp delivers a variety of sounds between glassy vintage cleans and modern high-gain distortion. In addition to the option to reduce the power amp output, the St. James 50 6L6 comes with a Celestion Zephyr speaker for powerful sounds, while the integrated Reactive Load and the Cab Rig speaker simulation allow silent recording or silent stage performances. furthermore, a reverb effect, an FX loop and an integrated USB audio interface complete the features of the St. James 50 6L6 guitar amplifier from Blackstar.
Flexible sound between clean and high-gain.
With its two-channel ECC83 preamp, the St. James 50 6L6 Combo turns out to be a first-class all-rounder for almost any style. While Channel I is clearly oriented towards Californian amps of the sixties and delivers glassy clean sounds with high effect pedal compatibility, the modern high-gain voicing of Channel II promises a juicy distortion and tight Distortion for rock and metal. In addition to the voicing switch that gives Channel II a looser tone character, the St. James 50 6L6 comes with a 3-band tone control to customize the guitar sound and a harmonically tuned reverb effect.
The clear control panel of the two-channel Blackstar St. James 50 6L6 combo helps to quickly and intuitively adjust the guitar sound.
6L6 power amp with power reduction and Celestion Zephyr speaker.
The power amp of the Blackstar St. James 50 6L6 works naturally with two of the name-giving 6L6 tubes and delivers 50 watts of power with a round, American sound character, which promises sufficient volume reserves for rehearsals and smaller gigs. The SAG mode provides a clear compression and a softer feel. To use the amp at home, the power can also be reduced to a neighborly two wat ts. The Celestion G12Z-70 Zephyr speaker, which was specially developed for the St. James series, also turns out to be a sonic highlight, not only promising a powerful sound with ideal tuning to the amp, but also contributing significantly to its low Gewicht.
Reactive load resistor and speaker simulation
To ensure that the St. James 50 Combo can be used for silent recording or contemporary silent stage environments, Blackstar equips it with a Reactive Load resistor and high-caliber speaker simulation. While the Reactive Load recreates the complex interaction between the power amp and voice coil of a speaker, the Blackstar Cab Rig Speaker Sim with powerful DSP promises particularly detailed and natural sound experiences when miking directly via the balanced XLR output, the line out or the integrated USB audio interface.