Klotz LX3-3X1K2-03.0 DMX Cable 3m

Specifications OT206YS:

• Conductor construction: tinned stranded copper, 7 x 0.20 mm (AWG 24/7)
• Insulation: Foam-Skin PE
• Outer diameter: 6 mm
• Min. bending radius: 30 mm
• Operating temperature: -20 °C/+70 °C
• Conductor resistance: < 85 Ω/km
• Capacitance:
• Core/core: 47 pF/m
• Characteristic impedance: 110 Ω
• Nom. Attenuation [dB/100m]:
• 1 MHz: 2.3
• 3 MHz: 3.9
• 10 MHz: 6.9
• Insulation resistance: > 30 GΩ x km
• Test voltage:
• Core/Core: 1200 V
• Core/screen: 500 V

The Klotz LX3-3X1K2-03.0 with a length of 3 m is a professional DMX cable that has numerous advantageous features. Especially its high noise immunity makes it an absolutely recommendable accessory. For this purpose, it is made of OT206YS wire and equipped with high-quality three-pin block XLR connectors. For absolutely reliable transmission of digital DMX lighting control signals. Transparent heat shrink tubing on both sides allows free labeling for clear use.

Cable by the meter: OT206YS

The OT206YS is a reliable AES/EBU cable, which offers protection against interferences due to its symmetrical signal routing by tightly stranded wire pairs and a double shielding of AL/PET foil, tinned copper braid and tinned copper braid. This guarantees extra good and undistorted signal transmission even over long distances. Excellent performance is also ensured by its good workmanship and outstanding electrical values. A robust, but at the same time flexible PVC jacket withstands heavy use, but at the same time is easy to lay and wind.

Klotz plug

The cable is rounded off by a three-pin XLR male and a three-pin XLR female connector in the usual excellent Klotz quality. They are durable, feature a plastic grommet as well as silver-plated contacts for good conductivity.

Made in Germany

Every Klotz cable is manufactured in Germany and subjected to scrupulous inspection. This ensures lasting quality and superior sound characteristics.