Xaoc Devices Lipsk is a bit inverter in Eurorack format. It allows the inversion of the individual bits produced by Drezno (or another module connected to its input header on the back) and delivers the resulting code to its output header. Bit inversion can be controlled manually by pressing any combination of the eight illuminated keys, orautomated by feeding gate signals into the gate input jacks. An active (5V) gate reflects the state of the respective bit. If the button is active (bit reversed), the gate reverses the bit again and results in a double inversion (no inversion).
The corresponding LEDs indicate the combined effect of manual and gate intervention. Bit processing is hardware-based to reduce latency so that binary signals can be manipulated at extreme speeds.
Xaoc Devices Lipsk at a glance:
Bitinverter in Eurorack format
Bit inversion can be manually controlled by pressing any combination of the eight illuminated keys or automated by gate signals
LEDs indicate the combined effect of manual and gate intervention
Hardware based bit processing allows manipulation of signals at extreme speeds