Your Feedback

Electro Voice ELX115

(25)

Item: PAH0010781-000

SOLD OUT!

Compare list
Recommend

Information on the disposal of old devices

The Electro-Voice ELX115 Passive PA Speaker is a two-way, full range stage monitor with a wide frequency range and coverage pa... All product info

This product is no longer available!

Find alternative or successor products...

We are happy to help you!

Export
export@musicstore.com
+49 (0)221 / 88 84 - 1610
+49 (0)221 / 88 84 - 2500

INTERACTIVE
CATALOGUE
MORE THAN 3.000
PRODUCT VIDEOS
EASY
RETURN
3 YEARS
WARRANTY
55.000 PRODUCTS
READY TO SHIP

Electro Voice ELX 115 15" 2-Way Passive PA Speaker

Superior performance at moderate weight

The Electro-Voice ELX115 Passive PA Speaker is a two-way, full range stage monitor with a wide frequency range and coverage pattern, making them ideal for most PA scenarios.

The Electro-Voice ELX115 Passive PA Speaker has an EVS-15K 15” woofer and a DH-1K 1.5” titanium diaphragm HF driver and packs an impressive punch with a 1600W peak power rating and a maximum sound pressure level of 134dB. Boasting a 90 degree x 50 degree coverage pattern and a 60 degree monitoring angle, the ELX115 is capable of providing high quality audio to both small and large venues alike.

The Electro-Voice ELX115 Passive PA Speaker also comes in a braced 15mm plywood enclosure with a pole mount option, further expanding its versatility.

The Electro-Voice ELX115 Passive PA Speaker features include:

EVS-15K 15” woofer
DH-1K 1.5” titanium diaphragm compression HF driver
1600 Watts peak / 400 Watts RMS
95dB SPL axial sensitivity (1W @ 1m)
90 degree horizontal coverage angle
50 degree vertical coverage angle
9-ply, 15mm plywood case material, internally braced, with black texture paint
50Hz – 20kHz frequency response
Internal crossover
17kHz crossover frequency
40Hz recommended high-pass frequency
134dB maximum sound pressure level (SPL)
7.4 Ohm minimum impedance
8.0 Ohm nominal impedance (passive)
Inputs on Speakon connectors
H 708mm x W 432mm x D 382mm
Weight: 21.9kg

Features:

Manufacturer: Electro Voice
Typ: Head
Signal Processing: Passive
Size of Woofer (Inches): 15
Size of Tweeter (Inches): 1.5
Power Output in W(RMS) @8Ohm: 400
Impedance (Ohm): 8
max. Peak SPL (dB): 134
Weight (kg): 23
Housing Material: Wood
Multi-Function Housing: Yes
Flange: 36mm
Airworthy: No
Beam angle: 90°
Frequency Response from (Hz): 75
Frequency Response to (Hz): 18000
Crossover Network: Yes
EQ: No
Link: Yes
Input: Speaker Twist
Output: Speaker Twist
Height (mm): 708
Width (mm): 432
Depth (mm): 382
incl. Stand: No
incl. Cover: Optional

Compare with similar products

Rating

(25)

Rate Now

Craftsmanship (4.8)
Price/Performance (4.9)
Sound (4.8)
Operating comfort (4.9)
Features (4.6)

25 Review

5 Stars
21 Customers
4 Stars
4 Customers
3 Stars
0 Customers
2 Stars
0 Customers
1 Stars
0 Customers

All languages

Electro Voice ELX115 15" / 1,5 "

Review from: VovaKennedy at 12/10/14

Excellent sound quality has always been the hallmark of the brand Electro Voice. In the price / quality ratio will hardly find a better model. The weight of each column composes about 25 pounds, which in principle is not a lot, and 400 watts of sound enough to handle small sites and premises. My recommendations

5 from 6 found this review helpful

Was this review helpful?

Elctro-Voice ELX115

Review from: Anna Yumshanova at 01/19/16

I receive this speaker week ago. Thanks Musicstore for good item package!
About speaker: this speaker has a good price – quality ratio. It’s the same Dynacord A115, the same components and speaker enclosure. Lightweight speaker, but this is because in the speaker use as woofer stamped speaker and plywood is not birch. This speaker can you as stage monitor, but for this usage better attach rubber foots to not damage enclosure paint.
About sound: Good HF frequency and low frequency, about Mid in cheap models electro-voice mid section not bad, but not so crystal like qrx series or zx5.