Palmer ilm

• Speaker simulation for authentic guitar sound without a mic
• Three sound presets: normal, mellow, bright
• Can be used as DI box when speaker simulation is bypassed
• Balanced XLR output
• Operation between amplifier output and speaker or at line out
• Switchable pre-attenuation for adaptation to amp level
• No hum: galvanic isolation through transformer
• Ground lift switch
• Simple and fail-safe: no power supply required
• Road-ready aluminium and steel enclosure
• Incl. a rewritable tour label to attach to the back of the ilm
• Engineered in Germany

Technical data

General

• Type: passive
• Number of channels: 1
• Isolated transformer: Yes
• Number of inputs: 1
• Input type: unbalanced
• Input connectors: 6.3 mm jack
• Number of outputs: 1
• Output type: balanced
• Output connectors: XLR
• THRU - outputs per channel: 1
• Ground lift switch: Yes
• Other Functions: Tone: Bypass, Normal, Bright, Mellow
• Enclosure material: Aluminum continuous casting
• Height: 140 mm
• Width: 50 mm
• Depth: 68 mm
• Ambient temperature (operating): - 20 - 70 °C
• Relative humidity: < 80 %, non-condensing
• Accessories (included): Label (tour label), rubber feet
• Weight: 0.445 kg

Audio

• Max. Input level (< 1% THD, 20 Hz): +12 dBu
• Max. Input level (< 1% THD, 1 kHz): +32 dBu
• Frequency response (±1 dB, relative 1 kHz): 10 Hz - 60 kHz
• Input impedance (1 kHz, max. level, -10dBV): 8.8 kOhm
• Output impedance (1 kHz, max. level, -10dBV): 125 ohms
• THD (30 Hz, +4 dBu, unity, unweighted): < 0,25 %
• THD (1 kHz, +4 dBu, unity, unweighted): < 0,009 %
• IMD (SMPTE) (60 Hz / 7 kHz, 4:1, +4 dBu): < 0,005 %
• Transformer ratio: 1:5