Laserworld EL-200RGB 200mW RGB Laser

The Laserworld EL-200RGB is a multi-color laser system with a total power of up to 200mW. It is often used in small clubs and bars, but is also an ideal solution for beginners and the home party cellar.

The user can control and play about 50 pre-programmed basic patterns via DMX. The red diode, the green DPSS module and the royal blue diode create beautiful and bright colors. A music mode and an automatic mode are also available. For the music mode, the sensitivity of the integrated microphone can be regulated. The on/off switch is located on the back of the device.

Features

• Total power typical: 200mW
• Minimum power: 145mW
• Power red: >60mW/650nm
• Power Green: >25mW /532nm
• Power blue: >60mW /445nm
• Beam parameters (full angle): approx. 3mm / 2mrad
• Laser sources: Diode, DPSS Laser
• Laser class: 3b
• Operating modes: stand-alone, music mode, DMX
• Scanner: high-speed stepper motors, 2-5kpps
• Scanning angle max.: 30
• Basic patterns: approx. 50 (levels, tunnels, grids, wave effects etc.)
• Accessories: power cable, manual
• Power supply: 85V - 250V AC
• Power consumption: 60W

Laser protection regulations:

Due to the strong bundling of the laser beam, the entire light energy is concentrated on a small area. If the human eye is hit by this beam, this can cause damage. In particular, there is a risk of eye injury when looking directly into the beam. If the beam is deflected, which is almost always the case with the compact show laser systems due to the scanning unit, the effect and thus the danger of the beam is much lower. matching the possible danger, lasers respectively devices containing a laser are divided into classes according to the accident prevention regulation laser radiation [BGV B2]. 99% of the compact show lasers currently available on the market and also all lasers offered by us belong to protection class 3a and 3b. These devices are therefore subject to approval. For safe operation at public events, a laser protection officer [radiation protection according to VBG 93 §6 (BGV-B2)] must be appointed. In the case of installations in public buildings (discotheques, multi-purpose halls, restaurants, etc.), the systems must be approved by the locally responsible TÜV (Technical Inspection Agency) or the Employer's Liability Insurance Association. The regulations valid in Germany for the operation of a show laser system must be observed. For more information, please contact your local employers' liability insurance association and the responsible TÜV company.