Laserworld PRO-1600RGB

The Laserworld PRO-1600 RGB Laser Light is a white light RGB laser light system with a total output power of up to 1600mW. It is not only equipped with fast scanners for great projections, it also comes with the super bright 637nm red, that is visible several times better than the 650nm plus has a thinner, more accurate beam profile. Therefore the Laserworld PRO-1600RGB ensures great visibility and is suitable for beam as well as for graphics projections.

This show laser light provides an analogue modulation. It means a better colour fading and a much broader colour hue. These facts make the Laserworld PRO-1600RGB ideal for all applications requiring many different colour hues and colour fadings.

The very advantage of the projectors of the Proline Series is the integrated Glass Effects Actuator: The systems not only run in normal scanner mode. Similar to an optical bench they are equipped with additional grating effects. Without the effects it is possible to show emotionalizing beam shows as well as graphics projections.

The integrated effects can be used individually through selecting a dip switch on the back panel or with a DMX controller, in addition all integrated effects can be used through Automatic mode or Music Mode including in conjunction with ILDA software for spectaculars results

The Laserworld PRO-1600RGB has an ILDA interface for professional computer control. Thus own or pre-programmed laser shows can be displayed by use of a laser control software, e.g. of Phoenix or Pangolin.

Laser Protection Regulations:
Due to the strong focusing of the laser beam, the entire light energy is concentrated on a small area. If the human eye is hit by this beam, it can cause damage. In particular, there is a risk of eye injuries when looking directly into the beam. If the beam is deflected, which is almost always the case with the compact show laser systems due to the scanning unit, the effect and thus the danger of the beam is many times lower. Lasers or devices containing a laser are classified according to the accident prevention regulation Laser Radiation [BGV B2]. 99% of the compact show lasers currently available on the market and also all lasers offered by us belong to protection class 3a and 3b. These devices are therefore subject to approval. For safe operation at public events, a laser protection officer [radiation protection according to VBG 93 §6 (BGV-B2)] must be appointed. For installations in public buildings (discotheques, multi-purpose halls, restaurants, etc.), the systems must be approved by the locally responsible TÜV (or regional equivalent) or the employers' liability insurance association. The regulations for the operation of a show-laser system valid in Germany must be observed (or, again, a legal regional regulation). Please contact your local employers' liability insurance association and the responsible TÜV Company for more information.