Presonus Eris Pro 6

• Active Studio monitor
  
• With coaxial driver system for a wider sweet spot and improved phase response
  
• 6.5-inch woven composite woofer driver
  
• 1.25-inch silk dome high-frequency driver
  
• With bass reflex port on the front for higher bass efficiency
  
• Optimized internal bracing for good suppression of cabinet resonances
  
• 140 W, Class AB dual amplification
  
• Frequency response 35 Hz to 20 kHz
  
• 103 dB SPL (peak @ 1m)
  
• Frequency adjustment in the treble (10 kHz) and midrange (1 kHz) (each -6 to +6dB continuously adjustable)
  
• Switchable low-cut at 80 Hz or 100 Hz (-12 dB per octave)
  
• Acoustic space switch (Flat, -2 dB, -4 dB) for precise adjustment to the mixing environment
  
• Inputs: XLR, TRS jack (balanced), RCA (unbalanced)
  
• Speaker is shielded against RF interference
  
• Overheating protection and subsonic filter
  
• Output current limiter and protection against voltage spikes
  
• Power-on delay to prevent power-on noise ("soft start")
  
• Internal power supply
  
• On & Off switch on the rear panel
  
• Power saving mode (speaker turns off after 40 minutes)
  
• Ceiling and wall mounting possible (bracket available separately)

Scope of delivery:

• Eris Pro 6 speaker
  
• Power cable
  
• Manual
  

The Presonus Eris Pro 6 - a speaker with many talents

The Presonus Eris Pro 6 is an active studio monitor with coaxial drivers composed of a 6.5" woofer and a 1.25" tweeter. It has several connection options and various protection circuits that ensure uninterrupted operation. For example, the Eris Pro 6 has an output current limiter and voltage spike protection to prevent excessive power amp output or sudden signal spikes from damaging the speaker. It is also equipped with overheating protection. With the shielding against high-frequency interference and a subsonic filter, it also ensures that really only the frequency range demands power from the speaker, which should actually be heard musically.

Sophisticated cabinet design

The Eris Pro 6 's point driver arrangement largely eliminates delay differences between the high and bass drivers. This coaxial speaker design thus results in a significantly larger sweet spot and improved phasing between the tweeter and bass driver. The bass reflex port with front opening also increases the efficiency in the bass range, which benefits the balance of the sound over the entire frequency spectrum. To prevent cabinet resonance, the Eris Pro 6 is also equipped with optimized internal bracing, which increases the stability of the box, thus avoiding unwanted vibrations in the cabinet.

Connections & control options

The Eris Pro 6 can be supplied with both balanced and unbalanced signals. For this purpose, an XLR input and a balanced 6.35mm jack connection, as well as an unbalanced RCA input (RCA) are available. To be as versatile as possible in the positioning in the room and to meet the sound preferences of the users, adjustments can be made on the back of the speaker in the bass, midrange and treble range. The three Acoustic Space options can also compensate for unwanted sound changes when positioned in front of a wall or in a corner. The volume of the individual speaker can also be conveniently adjusted via the gain control on the rear panel.

Possible applications

The Presonus Eris Pro 6 is suitable for various studio applications, both semi-professional and professional, and can be used here as desired for recording, mixing and mastering applications.