The Ethercon QUAD DMX-AES/EBU adapter from Cordial was developed to send DMX signals over a long distance. The adapter is available in a 3-pin M/F or 5 M/F version. The Ethercon QUAD DMX-AES/EBU adapter uses one pair of wires of a common 4-pair CAT cable and allows the transport of four parallel DMX or AES/EBU signals. The individual cables are color-coded and end after 70 cm split in a special cable socket with strain relief and bend protection based on the well-known Neutrik NE8FF. With the adapters can be bridged up to a distance of 150m. For this purpose, the company Cordial recommends the CCAT 7A cable.
Available types:
CDX 0,7 FN 5 QUAD-DMX (4x XLR female 5-pin to the Ethercon socket)
CDX 0,7 MN 5 QUAD-DMX (4x XLR male 5-pin to the Ethercon socket)
CDX 0,7 FN 3 QUAD-DMX (4x XLR female 3-pin to the Ethercon connector)
CDX 0,7 MN 3 QUAD DMX (4x XLR male 3-pin to the Ethercon socket)
Klotz OT206YS.100 OmniTRANS AES/EBU DMX Cable 100m (Black)
Accu-Cable AC-DMX3/100R DMX Cable 100m 110 Ohm, 3pol. (EUR/m=0,69)
lightmaXX DMX-Kabel 3-Pin 50m Rolle, 1x2x0,34 schwarz