Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
You have placed the following items into your shopping cart
Ready to ship
55.000 Products
55.000 products
ready for shipment
Money Back
30 Day Return Policy
The Laserworld CS-4000RGB FX MK 2 is a powerful, semi-professional, pure diode laser that can display typical laser effects such as beams, waves and tunnels, as well as simple graphics. In addition to the graphics-capable scanners, the laser has two integrated grating effects: Line grating and burst grating.
Together with the approx. 130 effects stored on the laser (planes, tunnels, grids, waves, etc.), these effects offer a wide range of possible combinations for impressive illumination of medium to large locations. The grating effects make the projected patterns appear as if they are being output by many projectors simultaneously. The resulting expansion enables effects that could not be achieved in any other way.
The Laserworld CS-4000RGB FX MK2 is an analog-modulated, full-color RGB diode laser system with a total output power of up to 3,500 mW. The red laser source has an output power of 850 mW / 635 nm, the green of 850 mW / 520 nm and the royal blue laser source has an output power of 1,800 mW / 450 nm. The diode laser sources provide powerful laser beams. The projector has good beam specifications with a beam diameter of approx. 4 mm and a beam divergence of 1.1 mrad. The galvo system has a scanning speed of up to 28kpps @ 8° ILDA.
The microphone sensitivity can be adjusted via the integrated
There is no air circulation in the optical area, the temperature is controlled via the separate heat sink section. This reduces maintenance and cleaning work to a minimum.
Approximately 130 (levels, tunnels, grids, waves, etc.) can be projected in different colors and at different speeds via DMX in both automatic mode and music mode. If the automatic mode is active, the pre-programmed patterns run without further action and in music mode the laser system projects in tune with the sound.
In addition to the modes mentioned above, this laser projector also offers a master-slave mode. Show lasers of the same series (slave projectors) that are connected to a main projector (master projector) via DMX cable project the same patterns as the master projector.
The Laserworld CS-4000RGB FX MK2 is computer-controllable via a professional ILDA interface. This allows you to show your own or pre-programmed laser shows, logos, texts or your own graphics and animations in combination with laser control software (e.g. Showeditor or Showcontroller).
There are safety features such as a key switch, an interlock and an on/off switch.
The Laserworld CS-4000RGB FX MK2 show laser projector comes with a compact housing that is lightweight and has a robust 360° bracket. The bracket allows various mounting positions: Both a hanging and a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations on a truss or on the ceiling.
The Laserworld CS-4000RGB FX MK2 is ideal for semi-professional applications and is perfect for medium-sized to large clubs and discotheques as well as for mobile DJs, private use and in any other party location.
