Roland S-0808 8x8 Input/Output Module XLR

The Roland S-0808 8x8 Input/Output Unit has unprecedented mobility enabling further convenience in many applications such as broadcast, event, live stage, audio installation and location sound. Enjoy flexibility in setup using external battery operation or power supplied over REAC.

The S-0808 weighs around 6.6lbs making it portable and easy to setup. Rugged construction with steel handles withstands the rigors of live applications and frequent use. Fan-less design enables quiet operation in any environment.

All inputs employ a high quality preamp with fully discreet circuit design resulting in outstanding sound. Eliminate the need for direct boxes by using the TRS or Hi-Z inputs. Control input gain (-65 to +10dBu), Pad and Phantom Power via a dedicated Roland S-4000R Remote Controller or using the PC Remote Control Software (S-4000RCS). When using as part of a V-Mixing System, these parameters are controlled directly from Roland’s M-480, M-300 or M-200i V-Mixer.

The main features of the Roland Roland S-0808 8x8 Input/Output Unit include:

• Number of Channels: 8 in 8 out
• AD/DA ConversionSample Rate: 96.0 kHz / 48.0kHz / 44.1kHz Signal Processing: 24 bits
• Frequency Response: -2 dB / +0 dB (@ +4 dBu, 20 Hz to 20 kHz)
• Total Harmonic Distortion + Noise: 0.04 % or less (Pad: On, Input Gain: +4 dBu, 22 Hz to 20 kHz)
• Dynamic Range: 110 dB
• Cross Talk: -80 dB or less (Input Gain: +4 dBu, typ.)
• Nominal Input Level: -65 to -10 dBu (PAD: Off), -45 to +10 dBu (PAD: On) (1 dB step, Max. +28 dBu)
• PAD: 20 dB On/Off
• Input Impedance: 600 ohms
• Recommended Load Impedance: 10 k ohms or greater
• Residual Noise Level (IHF-A, typ.): -80 dBu or less
• Equivalent Input Noise Level (E.I.N.): -128 dB
• Network Latency: 375 microseconds when using REAC cable only *1 (AD - REAC - DA Latency: about 1.2 ms)
• Connectors: Input x 8 (XLR type, balanced, phantom power, INPUT 1-8) Input x 2 (TRS type, balanced, INPUT 5/6) *2 Input x 2 (TRS type, balanced, with Hi-Z switch, INPUT 7/8) *2, *3 Output x 8 (XLR type, balanced) REAC EMBEDDED POWER x 1 (RJ-45 EtherCon type) REMOTE x 1 (RS-232C, DB-9 type), DC IN x 1 (XLR 4pin type)
• Power Supply: REAC EMBEDDED POWER or External Battery (DC 12V - 18V)
• Power Consumption: 24 W*