The Ethercon QUAD DMX-AES/EBU adapter from Cordial was developed to send DMX signals over a long distance. The adapter is available in a 3-pin M/F or 5 M/F version. The Ethercon QUAD DMX-AES/EBU adapter uses one wire pair of a common 4-pair CAT cable to transport four parallel DMX or AES/EBU signals. The single cables are colour-coded and end after 70 cm splitting in a special cable socket with strain relief and kink protection based on the well-known Neutrik NE8FF. With the adapters, a distance of up to 150m can be bridged. Cordial recommends the CCAT 7A cable.
Available types:
CDX 0.7 FN 5 QUAD-DMX (4x XLR female 5-pin to the Ethercon socket)
CDX 0.7 MN 5 QUAD-DMX (4x XLR male 5-pin to the Ethercon socket)
CDX 0.7 FN 3 QUAD-DMX (4x XLR female 3-pin to the Ethercon socket)
CDX 0.7 MN 3 QUAD DMX (4x XLR male 3-pin to the Ethercon socket)
Accu-Cable AC-DMX3/100R DMX Cable 100m 110 Ohm, 3pol. (EUR/m=0,69)
lightmaXX DMX-Kabel 3-Pin 50m Rolle, 1x2x0,34 schwarz
Cordial CDX 0,7 MN 3 QUAD DMX
lightmaXX Cable DMX 30m 5-pole XLR 110 Ohm