1x 6V6 power amp tubes (optional change to 1x 6L6)
7 watts maximum power (6V6) / 8 watts maximum power (6L6)
Monito (slave) DI output
Internal reverb effect
Gibson Falcon 5 1x10" Combo revives the spirit of the 1960s.
Gibson Falcon 5 1x10" Combo brings back the vintage spirit of the 60s
With the Falcon 5 1x10 " Combo, Gibson is launching a tube combo that revives the pure vintage spirit of the 60s. Inspired by the original Falcon series from the 1960s, Gibson is presenting a magnificent re-bot with a vintage design that is definitely worth seeing. Thanks to its 6V6 power amp tube, the amp achieves a unique overdrive that conveys the pure vintage warmth of the early tube amps. In addition, the sound of the Falcon 5 1x10 combo flows out of the 10" Jensen Blackbird ALNICO loudspeaker, which characterizes the quality of the tube amp with a crystal-clear output.
Convenient operation and natural tube warmth
The Falcon 20 1x12" combo comes with a low input (clean) and a normal input (clean to overdrive) for a higher output. The amp's power is supplied by three 12AX7 tubes in the preamp stage and a 6V6 tube in the power amp stage - the 6V6 tube can optionally be switched to a 6L6 tube. In total, the Falcon 20 1x12" combo with a 6V6 tube achieves a total output of 8 watts.
Simple setup, high sound quality
The Gibson combo is only equipped with one channel, but this provides a high degree of sound flexibility: In addition to a conventional volume control, the sound can be refined using the tone control. The integrated effects can be adjusted as desired using the reverb control.
Back of the Gibson Falcon 5 1x10" combo with visible 6V6 tube
Top view of the Gibson Falcon 5 1x10" Combo: 2x Input (Low & Normal), Volume, Tone, Reverb, Full- & Low-Switch, Power- / Standby-Switch.
