Focusrite ISA428 MkII 4-Channel Mic Preamp

Focusrite ISA428 MkII 4-Channel Mic Preamp - Four classic preamps with DI inputs and a premium eight channel A-D converter option. ISA series mic preamps have been the producers’ choice on countless hit records over the last two decades.

The ISA428 mk2 provides four of Focusrite’s prestigious transformer-based microphone preamps. It features the same classic circuitry and renowned audio quality found in the original at a new level of affordability. With selectable input impedance, direct instrument inputs and an optional eight channels of high-quality analogue to digital conversion, the ISA428 MkII creates the perfect front end for the discerning recording professional.

The Focusrite ISA 428 Mark II features four additional A-D converter inputs allow eight channels of high-quality conversion, with a dynamic range of 122dB and jitter performance below 250 picoseconds.

Ideal for mic matching or extended microphone creativity. Settings include the ‘Vintage ISA110’ setting, providing the original Focusrite signature sound.

Focusrite ISA428 MkII 4-Channel Mic Preamp Main Features:

• Four ISA-series transformer-based pre-amps
  • Over the past three decades, ISA mic preamps have contributed to many of the world’s most significant albums.
• Eight Channel optional A/D converter with 122dB dynamic range.
  • The same cutting-edge analogue to digital converter card used in the ISA828. Four additional ADC inputs allow eight channels of high quality conversion.
• Switchable Impedance
  • Ideal for mic matching or extended microphone creativity. Settings include the 'Vintage ISA110' setting, providing the original Focusrite signature sound.
• Four front panel instrument inputs
  • Instant access on the front fascia - no separate DI box required.
• Dedicated analogue insert points
  • Switchable insert points are featured on every channel, allowing routing (between pre-amp and output) to additional external processing.
• Variable high pass Focusrite filter
  • Provided on every channel, this is the same filter as featured on the original ISA110 and the legendary Focusrite forte console.
• Accurate LED meters for every channel
  • Clear metering designed to catch even the fastest and most elusive of transients.
• Weight: 5.5kg (12.2lbs)
• Dimensions (W x H x D): 480mm (W) x 88mm (H) x 280mm (D) / 19" (W) x 3.5" (H) x 11" (D)

Focusrite ISA428 MKII 4-Channel Mic Preamp Specifications

• Mic Inputs
  • Frequency response at minimum gain (0dB): -0.35dB at 20Hz and -3dB at 122kHz
  • Frequency response at maximum gain (60dB): -2.5dB at 20Hz and -3dB 103kHz
  • Gain range: 0dB to +60dB in 10dB steps, plus 0dB to +20dB continuously variable trim
  • Maximum headroom: +7.4dBu
  • THD+N: 0.0009% (measured at 1kHz -20dBu input signal, at 30dB gain setting, with a 20Hz/22kHz bandpass filter)
  • Noise EIN: -126dB (measured at 60dB of gain with 150 ohm termination and 20Hz/22kHz bandpass filter)
  • Noise at main output with unity gain: -98dBu (measured with a 20Hz/22kHz bandpass filter)
  • SNR: 123dB (relative to max output 25dBu)
  • SNR: 120dB (relative to 0dBFS (+22dBu)
  • CMRR: 88dB. Input Impedance, variable as follows:
    • Switched Impedance setting : Equivalent Input Impedance at 1kHz
    • Low : 600 ohms
    • ISA110 : 1400 ohms
    • Med (Medium) : 2400 ohms
    • High : 6800 ohms
• Line Inputs
  • Frequency Response at unity gain (0dB): -0.3dB at 20Hz and -3dB at 94kHz
  • Gain range: -20dB to +10dB in 10dB steps, plus 0dB to +20dB continuously variable trim
  • Maximum headroom: +25.4dBu
  • THD+N: 0.002% (measured with +4dBu input signal, 0dB gain setting, with a 20Hz/22kHz bandpass filter)
  • Noise at main output with unity gain: -91dBu (measured with a 20Hz/22kHz bandpass filter)
  • SNR: 116dB (relative to max output 25dBu)
  • SNR: 113dB (relative to 0dBFS +22dBu). Input Impedance: 10k ohms
• Instrument Inputs
  • Frequency Response at +10dB gain: -0.2dB at 20Hz and 0dB at 200kHz
  • Frequency Response at +40dB gain: -3dB at 20Hz and -3dB at 38.4kHz
  • Gain range: +10dB to +40dB continuously variable
  • Maximum headroom: +11.5dBu
  • THD+N: 0.006% (measured with -20dBu input signal, at minimum gain (+10dB), with a 20Hz/22kHz bandpass filter)
  • Noise at main output with minimum gain (+10dB): -95dBu (measured with a 20Hz/22kHz bandpass filter)
  • Input Impedance = >1M ohm
• High Pass Filter
  • Roll off = 18dB per octave 3 pole filter
  • Frequency range: 16Hz to 420Hz (continuously variable, measured at the 3dB down point)
• Meters
  • 6 LED meter is calibrated 0dBFS = +22dBu (the maximum level which can be correctly converted by the optional internal A/D converter before overload occurs). The meter calibration points are as follows:
    • Meter panel calibration value in dBFS : Equivalent dBu value
    • 0dBFS : +22dBu
    • -2dBFS : +20dBu
    • -6dBFS : +16dBu
    • -12dBFS : +10dBu
    • -18dBFS : +4dBu
    • -42dBFS: -20dBu

  Focusrite ISA428 MKII 4-Channel Mic Preamp - Front and Rear Connectivity

  • Analogue Channel Inputs (Inputs 1-4)
    • 4 instrument 1/4” TS jack inputs on front panel
    • 4 microphone XLR inputs on rear panel
    • 4 line 1/4” TRS jacks on rear panel
    • 4 insert return 1/4” TRS jacks on rear panel
    • 4 ADC XLR inputs on rear panel
  • Analogue Audio Outputs (Outputs 1-4)
    • 4 line XLR outputs on rear panel
    • 4 insert send 1/4” TRS jacks on rear panel
  • Other I/O
    • IEC power input connector 100Vac – 240Vac
  • Front Panel Indicators
    • 8 output meters 6 segment
    • 4 30-60 mic gain range selection indicator
    • 4 +48V phantom power indicator
    • 4 Phase indicator
    • 4 Insert In indicator
    • 4 Filter In indicator
    • 4 Input selection indicators (Mic, Line, Inst)
    • 4 Z In microphone input impedance selection indicators (Low, ISA110, Med, High) Clock select indicators (44.1, 48, 88.2, 96, 176.4, 192)
    • Ext clock indicators (Lock, Word clock, 256X)