LED pinspot with COB LED and DMX control as well as IR remote control
Features
LED pinspot with COB LED and DMX control as well as IR remote control
Equipped with 1 x COB (chip-on-board) 4in1 QCL RGBW
Auto, sound, master/slave and DMX mode
Convenient remote control via included IR remote control EUROLITE IR-7
Music control via built-in microphone with adjustable microphone sensitivity
Integrated show programs in auto and sound mode
Direct color selection for 19 colors
Stepless RGBW color mixing, color change, color fading, dimmer and strobe effect with variable speed, music control
Change of beam angle from (4° to 25°) by enclosed frost filter
Addressing and settings via control unit with 4-digit 7-segment LED display
3, 4, 5, 6 or 9 DMX channels selectable
Swiveling mounting bracket
Additional bracket for floor mounting
Switching power supply technology for mains voltage between 100 and 240 volts
LED: 1 x COB (chip-on-board) 10 W 4in1 QCL RGBW (homogeneous color mixing)
Operable in 3; 4; 5; 6; 9 CH DMX mode
The device is cooled by passive convection cooling
Controllable via IR remote control; stand-alone; DMX; music control via microphone; master/slave function
Flicker-free projection
The EUROLITE LED PST-10 QCL Spot is a LED pinspot that is perfect for lighting eg. mirror balls. The LED spot is equipped with a COB LED with a total power of 10W. The COB LED provides a homogeneous RGBW color mixture. The pinspot has an exit angle of only 4° and can thus optimally illuminate objects or mirror balls. In addition, a 25 ° frost filter is included to illuminate large areas. If several spotlights are used, you can also create a nice ACL effect.
The LED Pinspot has a compact but very robust housing. The cooling of the LED Pinspot is passive and therefore without a fan. The control of the EUROLITE LED PST-10 QCL Spot is via DMX or the supplied IR remote control. Of course, all settings can also be made via the control panel on the back.
Technical data
Power supply:100-240 V AC, 50/60 Hz
Total connected load:12 W
Protection class:IP20
Protection class:SK II
Fuse:T 0.5 A fuse replaceable
Lamp type:LED lamp
LED:1 x COB (chip-on-board) 10 W 4in1 QCL RGBW (homogeneous color mixing)
Flash rate:0 - 20 Hz
DMX channels:3; 4; 5; 6; 9
Power connection:Fixed power cable with Euro plug
Cooling:Passive convection cooling
Control:IR remote control; stand-alone; DMX; music control via microphone; master/slave function
Beam angle:4°
Beam angle (1/2 Peak):4°
Beam angle (1/10 peak):7°
Housing color:Black
Display type:4-digit 7-segment LED display
Dimensions:Length: 20.2 cm; Width: 16.3 cm; Height: 20.3 cm
lightmaXX Slim Spot ARC 18x 10W RGBW, IP65
PURElight PIKO PAR I 14x10W RGBW
lightmaXX Vega PAR COB
lightmaXX VEGA Mini PAR Quad 7x8W RGBW
lightmaXX LED PAR 54 54x 1W RGBW