Your Feedback

Shure Beta 87C Mikrofon Kondensator

(1)
Item: PAH0001443-000V000262060
Enable Social Media
Item in good condition, clamp with slight signs of wear  All product info

N/A ca. N/A
excl. VAT, plus Shipping Costs
Available immediately
Standard Shipping  (7-12 business days)

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Shure Beta 87C Vocal Microphone

Item in good condition, clamp with slight signs of wear

Robust vocal microphone with permanently polarized condenser capsule and cardioid characteristic.

The Shure Beta 87C has consistently been a top choice of performers and audio technicians around the world due to its superb accuracy and detail, and rich vocal production, incorporating a cardioid polar pattern

Developed in response to professional demands associated with the use of personal monitoring devices like the Shure PSM Series, Shure's new Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design.

The uniform cardioid polar pattern of the Beta 87C enables users to effectively reject ambient noise arriving at the rear of the microphone, an attribute that will be especially appealing to users of personal monitors and others who frequently experience undesirable sounds bleeding into their mixes.

Shure Beta 87C features:

  • Smooth, wide frequency response with slight presence rise
  • Uniform cardioid polar pattern for maximum isolation
  • Minimal off-axis tone coloration
  • Low-frequency roll-off compensates for proximity effect
  • Three-stage pop filter minimizes breath pop and noise
  • Break-resistant stand adapter
  • Frequency response: 50 to 20,000 Hz
  • (A25D) Swivel Stand Adapter and (26A13) Storage Bag included

Specifications:

  • Transducer Type Condenser (electret bias)
  • Frequency Response: 50 to 20,000 Hz
  • Polar Pattern: Cardioid
  • Output Impedance: Rated at 150 ohms (100 ohms actual ±20%)
  • Recommended minimum load impedance: 800 ohms
  • Output Level At 1,000 Hz: Open Circuit Voltage -51 dBV/Pa (2 mV) (1 Pa = 94 dB SPL)
  • Output Clipping Level 1000 ohm Load at 1,000 Hz: -6 dBV (0.5 V)
  • Maximum SPL: 139 dB at 1,000 Hz (0.25% THD, 1000 ohm load)
  • Self-Noise: 22 dB typical, A-weighted 24 dB typical, weighted per DIN 45 405
  • Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)
  • Hum Sensitivity: -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)
  • Connector Three pin (XLR) professional audio
  • Polarity Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the output connector
  • Case: Aluminum Construction with painted Blue Metalic Finish, and hardened steel grille with nickel satin chrome plating
  • Dimensions: 192 mm / 7 9/16 in. x 51 mm / 2 in. / handle 21 mm / 53/64 in.
  • Weight 207 grams (7.6 oz)
  • Power Requirements Phantom Supply Requirement 11 to 52 Vdc, positive at both pins 2 and 3
  • Current Drain 1.0 to 1.2 mA

Features:

  • Manufacturer: Shure
  • Capsule Type: Condenser
  • Polar Pattern: Supercardioid
  • Design: Hand Microphone
  • On/Off Switch: No
  • Frequency Range from (Hz): 50
  • Frequency Range to (Hz): 20000
  • Battery Power: No
  • Shotgun Microphone: No
  • Switchable Pad: No
  • Switchable Low Cut: No
  • incl. Clamp: Yes
  • incl. Thread Reducer: Yes
  • incl. Microphone Bag: Yes
  • incl. Cable: No

Department Information - PA

Music Store professional in Cologne

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

Video: PA

The PA Store

PA & Stage Technology - Picture Gallery