Doepfer A-185-1 Bus Access Module

The Doepfer A-185 Eurorack Bus Access Module is a Eurorack bus access module, which feeds CV and gate information into A-100 bus. The A-185 is an active bus access module to feed CV and Gate into the A-100 bus (e.g. when using more than one frame or with external CV/Gate interfaces). This module features miniature jack sockets for CV In, Gate In, 2xCV Out, 2xGate Out, 2 LEDs for CV/Gate control. In general the A-185 is recommended as soon as more than 2 VCO's (A-110, A-111) are controlled by the same control voltage source. Without interconnection of the A-185 in this case tuning inaccuracies (scale) may occur. The A-185 is mounted close to the VCOs. The controlling voltage for all VCOs is applied to the CV In socket of the A-185. By means of the CV line of the bus board the CV is connected to all VCOs at the same bus board.

The main features of the Doepfer A-185 Eurorack Bus Access Module include:

• An active bus access module to feed CV and Gate into the A-100 bus
• Miniature jack sockets (CV-In, Gate-In, 2x CV-Out, 2x Gate-Out)
• 2x LEDs for CV/Gate control
• Width: 4 TE / 20.0 mm
• Depth: 25 mm (measured from the rear side of the front panel)
• Current: 30 mA