DMX-controlled operation or standalone operation with master/slave function possible
Internal programs
Microphone sensitivity adjustable via Control Board
Rainbow effect with variable speed
Strobe effect with 2-18 flashes per second
Manual focus
Electronic dimmer
Small and handy
Light beam with 9° beam angle
Compatible with QuickDMX - the wireless DMX system from Eurolite
Phantom powered USB socket for QuickDMX receiver (accessory)
Control board with LCD and four control buttons for setting DMX start address, PAN/TILT reversal
Switching power supply technology for mains voltage between 100 and 240 volts
Additional rubber feet if the fixture is to be placed on the floor
LED: 1 x COB (chip-on-board) 30 W
Colour wheel 7 dichroic colours and open
Gobo wheel with rotating gobos, 7 gobos and open
Gobos interchangeable
Slot-in gobo system for gobo change without tools
Shake effect
Operable in 10 CH DMX mode
Cooling of the device is done by fans
Controllable via stand-alone; DMX; QuickDMX via USB (optional); master/slave function; music control via microphone
Flicker-free projection
Eurolite LED TSL-250 Scan COB at a glance
The Eurolite LED TSL-250 Scan COB is a compact and handy LED scanner for decorative lighting effects for example on stages or at small to medium events. Equipped with a powerful 30-watt COB LED, it creates a colourful show with a high light output. 7 rotatable gobos with slot-in technology allow a tool-free gobo change and the colour wheel offers 7 beautiful dichroic colours. Numerous effects like a rainbow effect with variable speed, strobe effect with 2-18 flashes per second as well as an electronic dimmer provide varied light effects.
The LED TSL-250 Scanner can be controlled in standalone mode with master/slave function as well as in music-controlled mode. The music control is done via the integrated microphone, whose sensitivity can be easily adjusted. In DMX mode, the LED scanner can be controlled with 10 channels. All settings and functions are configured via the control board with LCD and four operating buttons.
With a weight of only 3.16 kg and a height of 33 cm, the device is enormously light as well as compact and therefore perfectly suitable for smaller setups! Last but not least, the Eurolite LED TSL-250 Scan COB is also compatible with QuickDMX - the wireless DMX system from Eurolite. A QuickDMX receiver can be connected via the phantom-powered USB socket.
Technical data
Power supply: 100-240 V AC, 50/60 Hz
Total connected load: 65 W
Protection class: IP20
Protection class: SK I
Power connection: Power supply IEC (M) built-in version Power connection cable with safety plug (included)
Fuse: device fuse 5 x 20 mm, T 1 A fuse replaceable
LED: 1 x COB (chip-on-board) 30 W
Equipment: color wheel; gobo wheel with rotating gobos; focus manual
Color generation: Color wheel 7 dichroic colors and open
Gobos: gobo wheel with rotating gobos, 7 gobos and open
Outer diameter 14mm
Image diameter 10mm
Gobos interchangeable
Slot-in gobo system for gobo change without tools
Shake effect
DMX channels: 10
DMX input: 3-pin XLR (M) built-in version
DMX output: 3-pin XLR (W) built-in version
Cooling: Fan
Control: stand-alone, DMX, QuickDMX via USB (optional), master/slave function, music control via microphone
