Your Feedback

mixars LTA

(54)
Item: DJE0006019-000
  • SOLD OUT!
mixars LTA Product Image
Enable Social Media
High-Torque Scratch Turntable with straight tonearm, direct drive, die-cast aluminum platter, starting torque > 4.5 kg/cm  All product info

This product is no longer available!

Activate social media for sharing. Data will only be sent via social networks with your consent.

  • INTERACTIVE
    CATALOGUE
  • MORE THAN 3.000
    PRODUCT VIDEOS
  • EASY
    RETURN
  • 3 YEARS
    WARRANTY
  • 55.000 PRODUCTS
    READY TO SHIP

Mixars - LTA

High-Torque Scratch Turntable with straight tone arm

Mixars - LTA

The Mixars - LTA is a professional, direct-drive, high-torque DJ turntable with a straight tone arm, perfect for scratch enthusiasts and turntablists. Its powerful motor with a starting torque of more than 4.5 kg/cm provides the best conditions for smooth scratch performances. In addition, the adjustable pitch range (+/- 8%, +/- 16% and +/- 50%) allows for accurate mixing and optimal beat matching.

A special feature are the two RCA outputs (incl. integrated phono preamplifier), with which you can connect the Mixars - LTA to two DJ mixers simultaneously. This allows simple scratch battle setups and much more else possible. Apart from that, the Scratch-Turntable with its massive die-cast aluminum platter including thick rubber coating, the four big feet and its weight of 10 kg offers an ideal damping against bass feedback and a non-slip stand.

Mixars - LTA / gerader Tonarm

Straight tonearm for lower susceptibility to needle jumps

The DJ turntable has a straight, robustly built tonearm which, in contrast to S-shaped tonearms, has a higher resistance to jumping. Thus, needle jumps are reduced to a minimum during intensive scratches and backspins.

Mixars - LTA / 2 RCA-Ausgänge

2 RCA outputs

On the back of the turntable you will find two RCA outputs. This special feature provides a faster workflow for back-to-back setups, since you can use different audio interfaces or software with the same setup (DJ mixer & turntables) without having to change the cables.

placeholder
Mixars - LTA / Pitch & Quarz-Lock

Pitch range adjustable (+/- 8%, +/- 16% and +/- 50 %)

The pitch range of the LTA extends from +/- 8%, via +/- 16%, up to +/- 50%. With the dedicated %-button one of the three ranges can be selected and confirmed by LED. This extended range is ideal for more creative scratch performances. In addition, the Scratch-Turntable is equipped with Quartz-Lock. By pressing the corresponding Q button, the pitch jumps to zero percent, regardless of the position of the pitch fader.

Mixars - LTA / Reverse, Start & Stop

Reverse function, start and stop speed adjustable

With the two turning knobs Start and Brake you can set the start and stop speed from about 0.3 to six seconds. Also a welcome feature for scratch nerds and turntablists. In addition, the Mixars - LTA provides a reverse function that can be triggered via the corresponding REV button.

Rear / Connections

Mixars - LTA / Back

The connections of the Mixar - LTA are space-saving and easily accessible. The recessed design protects the plugs and sockets. Next to the two RCA connectors you will find a PH-LN click switch (Phono/Line), which activates the integrated phono preamplifier (LN) for both outputs simultaneously. This way you can also connect the turntable to a line input of a mixer.

Mixars - LTA features:

  • Turntable with direct drive
  • Gerard tonearm for lower susceptibility to needle jumps
  • Motor: 16 pole, 3 phases, brushless
  • Direct current motor with direct drive
  • Speeds: 33.3 RPM, 45 RPM, 78 RPM
  • Die-cast aluminum plate
  • Starting torque > 4.5 kg/cm
  • 2 RCA outputs (phono and line)
  • Start and stop speed adjustable
  • Pitch range adjustable (+/- 8%, +/- 16% and +/- 50 %)

Scope of Delivery:

  • incl. Headshell: Yes
  • incl. Slipmat: Yes

Features:

  • Manufacturer: mixars
  • USB Interface: No
  • Integrated Preamp: Yes
  • incl. Headshell: Yes
  • Adjustable Pitch Range: Yes
  • max Pitch Range +/- %: 50
  • Adjustable Torque: No
  • max. Torque kg/cm: 4.5
  • MIDI compatible: No
  • Width (mm): 450
  • Height (mm): 144.6
  • Depth (mm): 353
  • Weight (kg): 10
  • Colour: Black
mixars LTA Product Imagemixars LTA
N/A
$ 259.00
$ 220.00
$ 104.00

Compare with similar products

Department Information - DJ

Music Store professional in Cologne

MusicStore-MusicStoreShop:/department-footer/MusicStore_Aussen_Neu_schmaler.jpg

Video: DJ

Our DJ Store

Our DJ-Store

Our Pioneer DJ Selection

Our Pioneer DJ Selection