The Adam Audio T5V subwoofer set combines powerfulstudio equipment for excellent sound in any environment. The Adam Audio T5V offers clear, undistortedreproduction thanks to the U-ART Ribbon Tweeter and polypropylene woofer. The Fame Audio Orbital Sub 10 provides deepbass with its 10-inch driver and 200 watt Class D amplifier. The Fame Audio DB 038 monitor stand guarantees flexible placement thanks to its height adjustability.
Two Cordial microphone cables (XLR to jack and XLR to XLR) are also included to ensure reliable connections and transmissions.
Fame Audio Orbital Sub 10 Overview:
active subwoofer
with 10-inch polypropylene woofer driver
suitable for recording, mixing and mastering in all genres
perfect for home and project studios
downfired (downward-facing speaker cone)
bass reflex port on the underside
Inputs (L/R) each with XLR, 6.35 mm TRS jack or RCA (unbalanced) connections
200 watt Class-D power amplifier
Infinitely variable input amplification via input gain control
Frequency response from 30 Hz to 200 Hz
selectable crossover frequency between 50-130 Hz
Switchable high-pass filter at 80 Hz
180° phase rotation switchable for easier placement in the room
Magnetically shielded
suitable bass extension for the Fame Orbital 205S, 207S or 208S
can also be combined with active studio monitors from other manufacturers
Adam Audio T7V Overview:
U-ART 1.9" Accelerated Ribbon Tweeter
allows long working hours with little fatigue
extended dynamic range
direct, almost attack in the high frequency range even with complex transients
HPS waveguide from the S series
Reduction of early reflections on surfaces of eg. mixing consoles, desks, etc.
Lightweight polypropylene construction of the woofer
excellent impulse response even at high sound levels without breaking up the cone
high resolution of the stereo image
generously dimensioned bass reflex ports at the rear
Low-compression bass reproduction
Unadulterated output in a wide frequency band
powerful, compression-free sound reproduction even at very high sound levels
DSP-controlled crossover
undistorted output without interference between the drivers in the critical mid-range
Simple room acoustic adjustment options via high- and low-shelf filters
enables optimal adaptation to acoustically difficult listening environments or individual preferences
acoustically optimized cabinet geometry
compact cabinet dimensions
Cordial CFM 3 MV microphone cable overview:
Length: 3m
XLR to XLR
AWG 24
Conductor construction: 28 x 0.10
Material: CU bare
Conductor resistance: 85 Ohm/km
Shielding: Conductors made of bare copper wires
Capacitance: 95 pF/m
Diameter: 5.8 mm
Weight: 47 g/m
Conductor insulation: PE
Cordial EM 3 FM microphone cable overview:
Length: 3m
XLR to 6.35mm jack
AWG 24
Conductor construction: 28 x 0.10 mm
Material: CU bare
Conductor resistance: 53 Ohm/km
Shielding: Conductors made from bare CU wires (spiral shield, 95 % coverage)
