Активируйте поддержку социальных сетей, для того чтобы делиться информацией о наших товарах. Размещение информации в социальных сетях будет производиться только с Вашего согласия.
Информация о продукте
AUDIO TECHNICA AT 8033 - condenser shortmembranemicrophone
The Audi-Technica AT8033 Condenser Microphone is ideal for general audio acquisition such as interviews, acoustic guitar, percussion, overheads, vocals and more.
The Audi Technica AT 8033 Condenser Microphone features high-SPL capability and wide frequency response. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic excels in both studio and stage applications. It operates on battery or phantom power.
The Audi-Technica AT8033 Condenser Microphone main features include:
All-purpose condenser microphone ideal for handheld interviews and general audio acquisition
Excels in both studio and stage applications
Outstanding linearity both on- and off-axis
Features high SPL capability and wide frequency response
Operates on battery or phantom power
RoHS compliant—free from all substances specified in the EU directive on hazardous substances
SPECIFICATIONS
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 30-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: Phantom: –44 dB (6.3 mV) re 1V at 1 Pa
Battery: –45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE: Phantom: 250 ohms
Battery: 300 ohms
MAXIMUM INPUT SOUND LEVEL: Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): Phantom: 113 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
BATTERY TYPE: 1.5V AA/UM3
BATTERY CURRENT/ LIFE: 0.4 mA / 1200 hours typical (alkaline)
SWITCH: Flat, roll-off
WEIGHT: 159 g (5.6 oz)
DIMENSIONS: 194.2 mm (7.65") long, 26.0 mm (1.02") head diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; battery; soft protective pouch