Fischer Amps In-Ear Monitor Beltpack 2x XLR-Eingõnge

Hard-wired headphone amp body pack for those musicians whose instrument restrict their freedom of movement (keyboards, drums, percussions, background vocals).

Main Features:

• Two direct symmetric XLR inputs (no special cable required)
• Much better sound than wireless in ear systems
• Switch-over from stereo to mono-mix mode
• 2 x 40mW power with limiter
• Control for volume and pan/mix
• Sturdy aluminium case, holder of stainless steel
• Mains connector (lockable) for plugging in an external DC mains adapter (optional extra)
• Power supply with 9V block battery.
• Hours of operation with alkaline battery approx. 12h, with rechargeable battery approx. 8h

Specifications:

• Dimensions L x W x H (in mm): 127 x 82 x 30
• Weight: 290 g
• Input connectors: 2 x Neutrik XLR jack 3-pole, with interlock
• Earphone connector: 1/8" mini connector
• Frequency response: 30 Hz - 20 KHz +/- 2 dB
• Minimum impedance of earphones: 12 ohms per side
• Input impedance: 15kohms
• Nom. input level: 0dB - +4dB (limiter at +5dB)
• Nom. input level symetric: 0 dBV
• Max. Einput level symmetric: +4 dBV
• Limit input level symmetric: +5 dBV
• Max output power at 20 ohms: 40 mW per channel
• Max. operating current: 40 mA
• Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH
• DC-input plug: ext. input power DC 9V (pin +, ring -)
• Operating time of battery: approx. 8h with 270mAh rechargeable battery, approx. 12h with alkaline battery (depends on headphones volume)