The side-address Audio Technica AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional ...Вся информация о товаре
Активируйте поддержку социальных сетей, для того чтобы делиться информацией о наших товарах. Размещение информации в социальных сетях будет производиться только с Вашего согласия.
Информация о продукте
Audio-Technica AT4033 ASM - Large Diaphragm Condenser Microphone
The side-address Audio Technica AT4033aSM offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The Audio Technica AT4033aSM's 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals.
Features:
A strong up-front presence characterizes the sonic signature of this versatile pro-audio classic
Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
Floating-construction capsule assembly provides isolation from noise and vibration
Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
Custom shock mount provides superior isolation
Specifications:
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll-Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
Impedance: 100 ohms
Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
Noise: 17 dB SPL
Dynamic Range (typical): 128 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 48V DC, 3.2 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Weight: 13.4 oz (380 g)
Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
Output Connector: Integral 3-pin XLRM-type
Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case
Neumann TLM102 Studio Set Nickel
Lewitt Ray
Rode NT2-A Studio Solution
AKG C 214
Rode NT1 Studio Condenser Mic 5th Generation (Black)